.

Car Radiator

Acar radiator s a type ofheat exchanger.It is designed to transfer heat from the hot coolant that flows through it to the air blown through it by the fan.

Most modern cars use aluminum radiators. These radiators are made by brazing thin aluminum fins to flattened aluminum tubes. The coolant flows from the inlet to the outlet through many tubes mounted in a parallel arrangement. The fins conduct the heat from the tubes and transfer it to the air flowing through the car radiator.

The tubes sometimes have a type of fin inserted into them called aturbulator,which increases the turbulence of the fluid flowing through the tubes. If the fluid flowed very smoothly through the tubes, only the fluid actually touching the tubes would be cooled directly. The amount of heat transferred to the tubes from the fluid running through them depends on the difference in temperature between the tube and the fluid touching it. So if the fluid that is in contact with the tube cools down quickly, less heat will be transferred. By creating turbulence inside the tube, all of the fluid mixes together, keeping the temperature of the fluid touching the tubes up so that more heat can be extracted, and all of the fluid inside the tube is used effectively.

Car radiators usually have a tank on each side, and inside the tank is a transmission cooler. In the picture above, you can see the inlet and outlet where the oil from the transmission enters the cooler. The transmission cooler is like a radiator within a radiator, except instead of exchanging heat with the air, the oil exchanges heat with the coolant in the car radiator.Using plastic blow molding to make car radiator is more friendly environmental along with competitive price.



Send product request

To: Tandem Plastic Products(Zhongshan, China), Co., Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Plastic Pallet
Plastic Pallet 1.Item: Plastic Pallet; 2.Raw material: HDPE; 3.Manufacturing process: Blow Molding; 4.Events: Hollow blow molding technology with progress of tech...
car bumper
car bumper 1.Item: Car Bumper; 2.Raw material: ABS; 3.Manufacturing process: Blow Molding; 4.Events: Acar bumperis a structure attached or integrated to the f...
Blow molding;
Blow molding; Blow moldingis a manufacturing process by which hollowplasticparts are formed. In general, there are three main types of blow molding: extrusion bl...
bonsai pot
bonsai pot Using blow molding process to produce the watering pot and watering can is portable & convenient & reliable along with good quality and rea...
Plastic Model
Plastic Model 1.Item: Plastic mode; 2.Raw material: HDPE; 3.Manufacturing process: Blow Molding; 4.Events: Designers had consolidated with fitting model sizes an...
All supplier products

Same products

Dongfeng JOYEAR S50 Sedans Car
Dongfeng JOYEAR S50 Sedans Car Seller: FUDA INDUTRIAL CO.,LIMITED Dongfeng JOYEAR S50 Sedans Car,Dongfeng Sedan
JOYEAR S50 Sedan Car Gasoline Fuel
JOYEAR S50 Sedan Car Gasoline Fuel Seller: FUDA INDUTRIAL CO.,LIMITED JOYEAR S50 Sedan Car Gasoline Fuel,Dongfeng Sedan
Dongfeng Mini Car Sedans
Dongfeng Mini Car Sedans Seller: FUDA INDUTRIAL CO.,LIMITED Dongfeng Mini Car Sedans,Dongfeng Sedan
JOYEAR S50 Family Sedan Car
JOYEAR S50 Family Sedan Car Seller: FUDA INDUTRIAL CO.,LIMITED JOYEAR S50 Family Sedan Car,Dongfeng Sedan
JOYEAR S50 Cars Sedan With 1.5L
JOYEAR S50 Cars Sedan With 1.5L Seller: FUDA INDUTRIAL CO.,LIMITED JOYEAR S50 Cars Sedan With 1.5L,Dongfeng Sedan