PVDF Li-battery

PVDF Li-battery Grade FTH-223CharacteristicPropertiesSpecificationASTM Test standardAppearanceWhite and semi-transparent pellets/Density(g/cm3)1.74~1.77ASTM D792, @23/230CSolubilitySolution clear and transparent, no impurities300C, 1hour1g/10ml NMPRotation Viscosity(Mpa.s)≥2001g/10ml NMP, 300CIntrinsic Viscosity(dl/g)1.0-2.0DMA, 300CWater absorption (%)≤0.1Karl FisherMelting point(0C)165~175ASTM D3418,100C/minCrystallizing heat(0C)140/Surface resistivity(Ohm/square)≥1.1014ASTM D257/Din 53483Volume resistivity (OhmNaNe)≥1.1014ASTM D257/Din 53483Process safety instructions• λ PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds;• λ Operators should take good care of personal protection during the use procedure and processing.Packaging and storage• λ PVDF is sealed in plastic bag with 25kg net weight per bag and then put into drum.• λ It must be stored in clean, cool, dry place.
Other supplier products
|
|
Refrigerant R1234YF To Replace Refrigerant R134A |
HFO-1234yf is a hydrofluoroolefin with the formula CH2=CFCF3. It has been proposed as a replacement for R134a as a refrigerant in automobile air co... |
|
|
R600A For Refrigerator |
R600aR600a is a HFC and CFC free refrigerant, providing the most environmentally friendly refrigerant available. It is extremely energy efficient, ... |
|
|
PTFE Medium-size Particle Resin |
PTFE medium-size particle resinMain Technical PropertiesFT-G90AppearanceWhite powder, no impuritiesTensile strength, Mpa≥25.5Elongation at break, %... |
|
|
FEP Molding(Lining) Grade |
FEP Molding (Lining) GradeFEP Molding grade FT-M has excellent thermo-stability and chemical inertness, outstanding electrical insulation and very ... |
|
|
FEP Powder |
FEP PowderFEP coating powder has extraordinary properties, such as high apparent density, excellent fluidity, and thermal stability and leveling pr... |
All supplier products
Same products