PVDF Li-battery
PVDF Li-battery Grade FTH-223CharacteristicPropertiesSpecificationASTM Test standardAppearanceWhite and semi-transparent pellets/Density(g/cm3)1.74～1.77ASTM D792, @23/230CSolubilitySolution clear and transparent, no impurities300C, 1hour1g/10ml NMPRotation Viscosity(Mpa.s)≥2001g/10ml NMP, 300CIntrinsic Viscosity(dl/g)1.0-2.0DMA, 300CWater absorption (%)≤0.1Karl FisherMelting point(0C)165~175ASTM D3418,100C/minCrystallizing heat(0C)140/Surface resistivity(Ohm/square)≥1.1014ASTM D257/Din 53483Volume resistivity (OhmNaNe)≥1.1014ASTM D257/Din 53483Process safety instructions• λ PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds；• λ Operators should take good care of personal protection during the use procedure and processing.Packaging and storage• λ PVDF is sealed in plastic bag with 25kg net weight per bag and then put into drum.• λ It must be stored in clean, cool, dry place.
Другие товары поставщика
|
|
|
FEP Dispersion can be applied to process glass fibers fabric by dipping and roasting, corrosive and adhesive resistance coatings by spraying and co... |
|
|
|
R410AR410a is a colorless gas under ordinary temperature, and a colorless & Transparent Liquid under the pressure of itself, mixed by HFC-32 and HF... |
|
|
|
FKM (Fluoroelastomer)FKM is copolymer of vinylidene fluoride and hexafluoropropene. The content of fluorine is 66% byweight. It can be molded, extr... |
|
|
|
FEP Extrusion GradeFEP is the copolymer of tetrafluoroethylene(TFE) and hexafluoropropylene(HFP). It has excellent thermo-stability, outstanding ch... |
|
|
|
R143a or simply trifluoroethane, is a fluorocarbon compound that is a clear, colorless gas. It is used as a refrigerant either by itself or more co... |
Все товары поставщика
Похожие товары
