Precompound FKM
Precompound FKMPrecompound FKM is the copolymer ofHexafluoropropylene (HFP) and Vinylidene Fluoride, with curing system. It hasgood processing and excellent compression set, and used for producing o-ring,gasket, hose and seals etc.GradeFluorine content%Density g/cm3Mooney viscosityCompression setApplicationML(1+101 21℃)200℃×70H (%)Bisphenol Curing SystemFL-2660661.816516Excellent compression set,suitbale for O ring and gasket etc.FL-2640661.824015Good processing and compressingperformance, suitable for O ring and Shaped ringFL-2630661.823516Good metal bonding, processingand de-molding performance, suitable for gasket, seals and different kinds of rubber accessoriesFL-2620661.823014Good processing performance and Rheological properties, suitable for O ring and shaped ring.FL-2462661.852515Excellent resistance of methanoland extrusion performance, suitable for hose and plank stuff.FL-2464661.854514Good metal bonding, processingand de‐molding performance, suitable for gasket, seals and different kinds of rubber accessories.Package、storage and transportation:(1). Fluoroelastomer is packed in PE bags in the form of flake, and then packed into carton with net weight 25kg per carton.(2). Fluoroelastomer should be stored in clean, dry and cool warehouse. It can be transported as non-hazardous chemicals and should be far away from pollution sources, sunshine as well as water during transportation.(3). It is suggested that Flurine fluoroelastomer storing time limit should be one year after production. If exceeding one year, these products should be retested,they could be used continuously after being retested up to grade.
Other supplier products
|
|
New Type Foaming Agent R245fa |
HFC-245fa is a hydrocarbon used primarily for closed-cell spray foam insulation, also known as pentafluoropropane. Unlike CFC and HCFC blowing agen... |
|
|
Mixed Refrigerants R404a |
R404AR404A is a colorless gas under ordinary temperature, and a colorless & transparent liquid under the pressure of itself,mixed by R125, R134a an... |
|
|
PVDF Molding Grade |
PVDF Molding Grade FTH-213 Characteristic Physical properties Specification ASTM Test standard MFR(g/10min)1～10ASTM D1238, 2300C/12.5kgAppear... |
|
|
Refrigerant R125 |
R125R125 is a colorless gas under ordinary temperature and a colorless & transparent liquid under the pressure of itself, used as refrigerants, the... |
|
|
Refrigerant R152a For Aerosol |
R152aR152a is a colorless gas under ordinary temperature, and a colorless & transparent liquid under the pressure of itself, easily solube in oil b... |
All supplier products
Same products
