PF3041 Open Phenolic Resin
Phenol-formaldehyde resin(PF) is a polymer made by polycondensation of phenolic compounds and aldehyde compounds. It is one of the three major synthetic thermosetting resins.
Performance characteristics
Good high temperature performance:The cured phenolic resin has excellent heat resistance due to its aromatic ring structure and high crosslinking density. Generally, at 200°C, the heat resistance of phenolic resin is good. After long-term use at 180°C, it can still maintain its structural integrity and dimensional stability.
High residual carbon rate:When it exceeds 300°C, phenolic resin will decompose and gradually carbonize to form residues, and its residual amount is as high as 60%. At a temperature of 800-2500°C, phenolic resin will generate a layer of carbonized material on the surface of the material.
Low smoke and low toxicity:PF3041 Open Phenolic Resinis mainly composed of carbon, oxygen, and hydrogen. The combustion products are less toxic. It is easy to form a high-carbon foam structure during the combustion process. It has a good thermal insulation effect and can prevent internal combustion.
Radiation resistance:The radiation resistance itself is poor, but after being reinforced with glass or asbestos, it can become a good radiation-resistant synthetic material.
Strong adhesion:There are a large number of polar groups in the macromolecular structure. The strengthening of polarity can promote its penetration and adhesion. After the finished product is converted into a cross-linked network structure and cured, it can ensure the stability and durability of the bonding interface.
Good chemical stability:It has good stability to water, weak acids, and weak bases. It will decompose when it encounters strong acids and corrode when it encounters strong bases. It is insoluble in water and soluble in organic solvents such as acetone and ethanol. The cross-linked phenolic resin can resist the decomposition of many chemical components, such as gasoline, ethylene glycol, and various hydrocarbons.
Send product request
Other supplier products
 |
Felt Cloth Two Sides Faced PF Board for Exterior Wall | SQ Insulation presents theFelt-Cloth Two-Sides Faced PF Board– a revolutionaryphenolic foam insulationsolution combining exceptional thermal ... |
 |
Fire Safe Phenolic Duct Series | The phenolic duct systemis designed for high-risk environments. It uses closed-cell foaming technology to achieve ultra-low thermal conductivity (0... |
 |
Felt Cloth Faced PF Board for Exterior Wall | Our SQ PF Board represents the pinnacle of high-performance thermal insulationtechnology, combining exceptional fire resistance with outstanding th... |
 |
Aluminum Foil with One Side Faced PF Board for Exterior Wall | Our SQ PF Boardrepresents the next generation of rigid foam insulation, engineered to deliver unmatched thermal efficiency with a 0.020-0.022 W/m&m... |
|
|
PF3041 Open Phenolic Resin | Phenol-formaldehyde resin(PF) is a polymer made by polycondensation of phenolic compounds and aldehyde compounds. It is one of the three major synt... |
Same products
 |
Limestone | Seller: Guangdong Dacheng Ceramics Co., Ltd. | Limestone Limestonedesign is inspired by Limestone, the “stone with the most story” ... |
 |
Welded Stainless Steel Roofing System | Seller: Guangzhou B&G Building Technology Co.,Ltd | Welded Stainless Steel Roofing System Stainless steel fully welded roofing systemis a high-end r... |
 |
Flat Roofing System | Seller: Guangzhou B&G Building Technology Co.,Ltd | Flat Roofing System The surface of the roof panel of the high level straight metal roofing syste... |
 |
Double Lock Standing Seam Roofing System | Seller: Guangzhou B&G Building Technology Co.,Ltd | Double Lock Standing Seam Roofing System Tech-seam special seal is a 360° double-crimped ful... |
 |
Super Wind Uplift Resistant Roofing System | Seller: Guangzhou B&G Building Technology Co.,Ltd | Super Wind Uplift Resistant Roofing System The Tech-zip II Wind Resistant Upright Hem Metal Roof... |
