Fuse wire
Fuse elements are made of precisely tested materials, high purity silver or silver-copper or nickel-chromium EUTECTIC, depending on the current rating. The fuse is extruded by a high-precision die. The laser micrometer checks the cross-section to ensure accuracy, while careful assembly ensures that no cracks, shrinkage or distortion will occur, which will not affect current accuracy
Other supplier products
|
|
Drop fuse |
1. LOW MINIMUM BREAKING CURRENT, low power loss, low arc voltage. 2. High breaking capacity and effective short-circuit expected current limit. 3. ... |
|
|
Fuse wire |
Fuse elements are made of precisely tested materials, high purity silver or silver-copper or nickel-chromium EUTECTIC, depending on the current rat... |
|
|
Melamine Glass Laminated tube/melamine tube/glass laminated tube |
Melamine tubing is made from a higher-strength fine glass fiber woven material and a melamine resin system. It has good arc extinction characterist... |
|
|
Epoxy glass fiber reinforced plastic composite pipe/glass fiber reinforced plastic pipe/glass fiber reinforced plastic pipe/glass fiber reinforced plastic pipe/glass fiber reinforced plastic pipe/glas |
The composite pipe is made by wrapping the vulcanized fiber pipe with epoxy saturated fiberglass filaments. The filament winding angle is usually s... |
|
|
Current limiting fuse |
Can Be used in a 50 hz indoor system, rated voltage is 3.6 kv, 7.2 kv, 12 KV, 24 kv, 40.5 kv, together with other switching equipment (such as load... |
All supplier products
Same products
