Fiberglass Rod
Fiberglass rods are made from fiberglass epoxy, which are then pulled and pulled. And complete the design, calcination and curing. It is used in the high-voltage electrical production of reactors, fuse drops, dry-type insulated transformers and lightning arresters. The user can choose according to the need. Sizes range from 8-90 mm. There are a variety of medium-sized, high-temperature type, acid-resistant type. And we can manufacture according to the customer's request.
Other supplier products
|
|
Fuses Brass parts/fuses |
We manufacture brass parts and fuse tubes for our customers. We can assemble them according to sample or drawing. Welcome to consult and negotiate. |
|
|
Vulcanized Fiber Board, vulcanized fiber coil, steel paperboard |
硫化纤维板由棉纸或高纯度木质纤维素纸制成。纸层用氯化锌处理，然后转移到所需厚度的均匀材料中。然后，将最终产品清洗，干燥，压延并加工以获得最终的化学纯硫化纤维片。根据等级和用途，硫化纤维板的密度范围为1.00 G / CM至1.35 G / CM。它的强度与铝相似，但密度仅为铝的一半。硫化纤维板... |
|
|
Current limiting fuse |
Can Be used in a 50 hz indoor system, rated voltage is 3.6 kv, 7.2 kv, 12 KV, 24 kv, 40.5 kv, together with other switching equipment (such as load... |
|
|
Fuse wire |
Fuse elements are made of precisely tested materials, high purity silver or silver-copper or nickel-chromium EUTECTIC, depending on the current rat... |
|
|
Melamine Glass Laminated tube/melamine tube/glass laminated tube |
Melamine tubing is made from a higher-strength fine glass fiber woven material and a melamine resin system. It has good arc extinction characterist... |
All supplier products
Same products
