LCD TV Mould
LCD TV Mould
TV screen frame mold is used to produce TV screen frames, it should be strong and assembly well with the screen. It has an undercut to lock the screen inside stablely. For the TV screen frame mold, we usually make one cavity mold, because of its big size, the injection machine needs 350T to 1000T upon the frame size. Green Vitality has been made screen mold more than 1meter.
High-quality TV LCD Screen Frame Mold
To produce a high-quality TV screen frame mold, we need to work hard on mold design and analyze the injection, ejection, and cooling systems, so that the screen frame is without flash, sink marks, deformation, and easy demolding. These are very important factors when making TV screen frame mold and injection the parts. Our aim is once the injection parameter is set by our customers, the mass production will be continuously good, and no need to repair.
Basic Information for TV Mold
TV Mould Specification
How to Choose A Good TV
Choose a higher definition for a better view, protect your eyes.
Choose a famous brand to get high-quality TV and good after-sales service.
If you need to install the TV screen on the wall, please make sure you have fixed it firmly.
You need to check the socket, plug, and the wires frequently, once you find any broken on them, you must replace the broken parts, this is very important for your family's safety.
If you leave home for a holiday or don't watch TV for a long time, please remember to open it from time to time, this can increase the service life of your TV.
You must take care of your children and teach them do not play around with the TV.
Green Vitality Industryis a professional injection mold makerin various industries since 1993. We provide keyboard key mold, keycap mould, custom plastic injection mold, plastic injectionand etc. Want to know more, contact us.
Send product request
Other supplier products
 |
Home Appliance Mould | GV Mold has rich experience in home appliance molds (such as television, refrigerators, fans, washing machines, air conditioners, and various smart... |
 |
Filter and Flow Limiting Apparatus | The family mold is used to produce injection parts for liquid filtration and flow monitoring and control systems. These accessories are customiz... |
 |
LCD TV Mould | TV screen frame mold is used to produce TV screen frames, it should be strong and assembly well with the screen. It has an undercut to lock the scr... |
 |
Car Light Mould | Car Light Mould The car headlight mouldplays a vital role in illuminating vehicles, serving as the eyes of cars. It encompasses all the lighting s... |
 |
Plastic Food Container Mould | Plastic meal boxes mainly used for packing foods, so it need to be heat resistant and non-toxic,and could meet the requirements of environmental pr... |
Same products
 |
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | Seller: ZK Electronic Technology Co. | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole Fr4 PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/3.5mil Inner l... |
