SCB ( Surge Protector Circuit Breaker )-SSD ( SPD Specific Disconnector)

• 

In low voltage power systems, a power surge circuit breaker(SCB)-SSD ( SPD Specific Disconnecotor) is an external disconnector used in series with a surge protector (SPD). Surge protector circuit breakers are suitable for AC 50/60hz, 15/20 amp, 230v-400v range of TT, TN, and other power supply systems. The product power frequency action current is less than 3A, (8/20s impulse current can pass through 120kA). All the performance indexes of products exceed miniature surge arrester circuit breakers and fuses, making them the best choice for SPD backup protection. The SCB (SSD) is connected in series on the SPD circuit and has the ability to resist high surges. The T1 level can reach up to 25KA (10/350μs), and the residual voltage is low. The surge protector main breaker can intelligently identify lightning current and power frequency current. When the power distribution system fails, it can trip quickly within 0.1S to protect the SPD from fire.

Features OfSurge Protector Circuit Breaker-SSD ( SPD Specific Disconnector)

1. The SCB (surge protector circuit breaker)-SSD ( SPD Specific Disconnecotor) is specially designed for SPD according to the requirements of GB18802.1/IEC, to solve the problem that when the SPD has power frequency leakage current or working frequency follow current due to deterioration or power frequency overvoltage, The SCB acts quickly to disconnect the SPD from the power frequency distribution system but does not act when the SPD discharges the lightning electromagnetic pulse current; it effectively solves the possibility of serious accidents such as burning and explosion in the application of the SPD, At the same time, it effectively solves the problem of protection dead zone when using a fuse or a circuit breaker as an external disconnecting device. In low-voltage power distribution systems, it is an ideal companion device for voltage-switching SPDs and voltage-limiting SPDs.

Note: It is forbidden to connect other loads at the end of the SCB.

Specification OfSurge Protector Circuit Breaker-SSD ( SPD Specific Disconnector)

Dimension of Surge Protector Circuit Breaker-SSD ( SPD Specific Disconnector)

Diagram OfSCB SPD Circuit Breaker-SSD ( SPD Specific Disconnector)

As a spd supplier,Our company is specialized in researching and producing all kinds of lightning protection products such as power surge protectorseries, intelligent lightning protection system, intelligent surge protector series, and SPD backup protection switch series, professionally design.

Other supplier products

	2 In 1 SPD for CCTV M10-12 D12Y2	2 in 1 monitor lightning arrester(power and control), a Kind of SPD, designed for analog video/ digital camera to protect camera power, control lin...
	3 in 1 SPD for CCTV	surge protection for cctv systems poe camera lightning protection surge protector for security cameras surge protector for cctv camera ip camera su...
	R232 / DB Series signal surge protection device	Series signal protector designed for communication network line not to be spoiled by lightning over-voltage, induced over-voltage, and static disch...
	Signal SPD	Signal surge protective device(SPD) is actually a signal lightning arrester, which is installed in series in the signal transmission line, usually ...
	AC Power SPD	AC power SPDis mainly applicable to the power distribution systems for Class I / II / III( Type1, type 2, type3) protection. Surge arresters for AC...

Same products

	CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS	Seller: ZK Electronic Technology Co., Limited	Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ...
	CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF	Seller: ZK Electronic Technology Co., Limited	Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ...
	Heavy Copper PCB Manufacturer	Seller: Xinfeng Huihe Circuits Co., Ltd.	Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material...
	8 Layer ENIG Half Hole Custom PCB	Seller: Xinfeng Huihe Circuits Co., Ltd.	Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay...
	4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board	Seller: Xinfeng Huihe Circuits Co., Ltd.	Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay...