Soap Box Mold
Plastic soap is also made by plastic injectionmold, as it need dimensional stability, good apperance and good color performance, so we have to choose the right materails for the mold and box,and the soap mould boxneed to be designed with right consturction, such as injecting system, gate, runner, cavity quantity,cooling system, demolding etc.,by our full experience,our injection mold could meet or exceed our customers expectation.
High-quality Soap Box Mold
We choose the right material(ABS) to meet the application requirements, according to the part design, we choose the right injection machine, we design the mold with 2 cavities for cost-saving and easy repair, the parting line is selected at the maximum contour of the plastic parts to let the parts are easily be released, with a good finish, right dimensions, and high quality, and our design for gate, runner and cooling system could avoid parts defects, we inspect and test materials and each process strictly, that's why we can make high quality mold.
Points of making soap box mold
Choosing the right material for the box, ABS could make the parts with good strength, good rigidity, good dimensional stability, and good coloring performance.
Designing the proper injecting system to ensure the plastic material could be heating melt well and venting.
Choosing the good mold material and inserts to ensure the high quality of the mold.
Designing the shot runner, good cooling system to avoid part defects during the production.
Using robots to pick up the parts during production can also enhance production efficiency.
Following our construction to install and use the mold, to make sure there's no any damage for the mold and less repair.
As a plastic injection factory, we have types of related products for sale, if you have needs, please contact us.
Send product request
Other supplier products
 |
Industrial Plastic Injection Mold | The injection moldingpart is replacing metal products in many fields of industrial applications to meet the requirement of lightweight industrial e... |
 |
Plastic Spoon Mould | Plastic spoon mainly used for eating, so it need to be heat resistant and non-toxic,and could meet the requirements of environmental protectionso, ... |
 |
Industrial Plastic Injection Mold | The injection molding part is replacing metal products in many fields of industrial applications to meet the requirement of lightweight industrial ... |
 |
Industrial Plastic Injection Mold | The injection molding part is replacing metal products in many fields of industrial applications to meet the requirement of lightweight industrial ... |
 |
Plastic Gear Mold | Injection molded plastic gearsis one of the most widely used transmission mechanisms in the field of instruments & meters, timers, reducers, ca... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Seller: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | Seller: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
