Fuel Injectors
Auto fuel injector, is a part that injects fuel into the engine cylinder. It also is a simple solenoid valve. When the solenoid coil is energized, the suction force is generated, the needle valve is sucked up, the nozzle hole is opened, and the fuel is ejected at a high speed through the annular gap between the needle and the nozzle hole at the head of the needle valve, forming mist and is conducive to full combustion.
The car fuel injectoritself is a normally closed valve, that is when no control signal is input, the valve is always closed. While the normally open valve is when there is no input control signal, the valve is always open, and a valve needle moves up and down to control the valve opening and closing. When the engine ECU sends a fuel injection command, its voltage signal will cause the current to flow through the coil in the car injectorto generate a magnetic field to suck up the valve needle, so that the valve can be opened and the fuel can be ejected from the fuel injection hole.
The biggest advantage of fuel injectorsproduced and sold by MAPMS is that the fuel supply control is very precise so that the automobile fuel system can have the correct air-fuel ratio in any state, which not only keeps the engine running smoothly, but also the exhaust gas can meet the specification of environmental regulations.
Fuel Injectors Features
Strong self-cleaning ability, the nozzle holes are not easy to deposit carbon and block.
High performance of injection characteristics with good injection angle and good atomization effect.
Easy to clean.
What Are the Symptoms of a Bad Fuel Injectors?
Engine Jitter
When the fuel injector is damaged and the fuel injection is not smooth, the engine will have symptoms such as running jitter during the working process.
Power Drop and Fuel Consumption Increase
Once fuel injector is damaged, the fuel injection amount and fuel injection pressure cannot be guaranteed, which will cause the symptoms of vehicle power drop and fuel consumption increase.
Increased Exhaust Emission Pollution
The failure of fuel injector will inevitably affect the mixing and combustion of combustible gas mixtures, which will result in an increase in vehicle exhaust emissions.
Difficulty Starting or Even Stalling
If the fuel injector is seriously damaged, the vehicle will have difficulty in starting, or even suddenly stall during driving.
The Engine Lacks Cylinders
If the fuel injectors of individual cylinders are seriously damaged, the engine is very likely to have cylinder shortages, which will cause the engine to shake violently.
Black Smoke from Car Exhaust
As the damage of the fuel injector, the atomization of fuel and the mixing with air cannot be guaranteed, so the combustible mixture cannot be completely burned, resulting in black smoke from the vehicle.
For more information about car fuel injection system, please feel free to contact us!
If you need any kinds of car auto spares, please contact us, as one of the most professional car spares suppliers, MAPMS is willing to offer you high quality products.
Send product request
Other supplier products
 |
Ignition Coil Rubber Boots | MAPMS supplies car rubber boots for COP and pencil ignition coils, which is made of high-quality silicone, and with withstand high pressure over 40... |
 |
Auto Relays | Auto recloser relay control higher voltages or currents by using lower voltages or currents. When a certain voltage or current is applied to both e... |
 |
Starter Motor | The vehicle starter can convert the electrical energy of the battery into mechanical energy and drive the engine flywheel to rotate to start the en... |
 |
Crankshaft Position Sensors | The car crankshaft sensordetermines the position of crankshaft, that is, the angle of crankshaft and engine speed. It usually works together with c... |
 |
Airbag Sensor | The airbag sensor is the input device of control signal in the SRS system. When the vehicle happens to collides, the airbag sensor detects the inte... |
Same products
 |
Lightweight Liquid-cooled LED Module 300W | Seller: Shenzhen Getian Opto-electronics Co., Ltd. | Lightweight Liquid-cooled LED Module 300W Product Description Lightweight Liquid-cooledLED Modu... |
 |
600W Liquid Cooled LED Module | Seller: Shenzhen Getian Opto-electronics Co., Ltd. | 600W Liquid Cooled LED Module Getian’s600W Liquid CooledLED Moduleis designed for high-pow... |
 |
Liquid-cooled LED Module | Seller: Shenzhen Getian Opto-electronics Co., Ltd. | Liquid-cooled LED Module Getian’sLiquid Cooled LED Modulesare designed to deliver stable p... |
 |
High-purity silica nano powder | Seller: Hebei Guiyan Electronic Materials CO., Ltd | High-purity silica nano powder High-purity silica nanopowderis a nano-silica powder prepared via... |
 |
High purity organic colloidal Silica | Seller: Hebei Guiyan Electronic Materials CO., Ltd | High purity organic colloidal Silica High-purity organic silica solis manufactured from high-pur... |
