5-axis Laser Micromachining System
The ordinary laser drilling system can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole processing. Besides the standard straight hole and the taper hole processing, the 5-axis laser micro machining system can also process the inverted cone hole, which greatly expands the laser drilling applications. With different wavelengths and super fast lasers, the thermal effect of drilling is small and the surface treatment is smooth. Only by making the processing materials unlimited, has been applied to drilling and processing in all walks of life.
Key Features Of5-axis Laser Micromachining System
In order to ensure accurate synchronization, it is necessary to process the position data of each axis under the same processor and control clock. This design uses high speed digital chip FPGA to achieve
The positioning accuracy of the galvanometer will directly affect the machining accuracy of the equipment, and the factors affecting the positioning accuracy of the galvanometermainly include the accuracy of the galvanometer feedback system, controller and the accuracy of correction.
The self-developed 24-bit high-precision encoder, combined with the high bandwidth driver based on PID and feedforward controller, improves the control accuracy of the system.
Adopt high-precision CNC machine tool to fix and clamp important structural parts at one time to ensure high-precision installation of galvanometer motion module.
Specifications Of 5-axis Laser MicromachiningSystem
|
Working field size (Diameter, Depending On Nozzle Opening) |
mm |
φ0.025mm to φ1mm |
|
Maximum Focus Range In Z Direction |
mm |
±1mm |
|
Entrance Beam Diameter (1/e2) |
mm |
10mm |
|
Focus Diameter In Image Field (1/e²) for M² = 1 |
um |
25um |
|
Maximum Angle Of Incidence |
18° |
|
|
Precession Frequency |
HZ |
200-600HZ（rpm） |
|
Objective Focal Length |
mm |
50mm |
|
Repeatability |
um |
≤0.5um= |
|
Theoretical Resolution Of Incidence Angle |
urad |
2urad |
|
Dimension(L*W*H) |
mm |
601×280×274 |
|
Weight |
Kg |
For more information about cost of galvanometerand laser micromachining ppt, please feel free to contact us!
Send product request
Other supplier products
 |
3d Large Field Size Dynamics Focusing System | The 3d dynamic focusing system mainly consists of XY galvo, dynamic focusing module, control card and upper computer software. By changing the posi... |
 |
VCM G2 | VCM G2 adopts full digital galvanometer driver, digital driver board of basic FPGA, stable performance, not easy to be disturbed, flexible to use, ... |
 |
Galvo Scanner | The single-axis galvo motor system contains a high-precision sensor and a motor part based on moving magnet technology. The motor rotor is optimize... |
 |
Laser Lens | Common Fθ lens is a series of general lens used in laserfields. The common F-theta lens has developed into the 3th generation product after e... |
 |
High Power Galvanometer Welding System | High power galvo laser welding systemis independently developed by Han's Scanner. The system after fully validated, with carefully designed double ... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Seller: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | Seller: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
