Oil Injected Air Compressor
Oil Injected compressorare widely used in various industries to provide compressed air power. CMN oil injected screw air compressor adopts patented shaft sealless design to ensure that the air end will never leak oil. The unique single-screw type air end achieves twelve times of compression in one rotation, with high efficiency. The ultra-high machining accuracy allows the air end to achieve good sealing and lubrication effects by spraying only a small amount of lubricating oil so the oil content can be less than 2ppm to meet most usage requirements.
OIL INJECTED SCREW COMPRESSOR VS RECIPROCATING PISTON COMPRESSOR
Piston air compressors use the piston to reciprocate in the cylinder to compress the air. They have high noise and vibration and many wearing parts. After the piston rings are worn, the air volume will decrease causing the decreased efficiency.
The oil injection screw compressormainly consists of a screw and star wheels to form a compression chamber. The air compression process is completed through the rotation of the screw which has higher requirements for processing accuracy because higher accuracy means higher volumetric efficiency. The noise and vibration are small, the unit has basically no wearing parts so the maintenance cost is low.
HOW DO OIL INJECTED AIR COMPRESSORWORK？
The main components of an oil free vs oil injected compressor are the air end, motor, oil and gas separation tank and cooler. Since the oil requires a higher temperature to ensure its good lubricity, the oil injected air compressor is generally air-cooled. The air is filtered by the filter element and then sucked into the air end for compression.
Lubricating oil is injected into the air end for lubrication and sealing. The compressed oil and gas mixture is separated by the separation core in the oil and gas separation barrel to get compressed air with an oil content of less than 2ppm. After being cooled by the air-cooled cooler, the high-temperature oil returns to the compression air end and circulates continuously.
For more information about difference between oil free compressor and oil injected compressor and a screw compressor, please feel free to contact us!
Send product request
Other supplier products
 |
OILLESS SCROLL TYPE AIR COMPRESSOR | CMN scroll style compressorhas an air supply pressure of 2 to 12 bar, a gas production volume of 255 to 1660L/min, and an ultra-quiet design. CMN o... |
 |
REFRIGERATED AIR DRYER FOR AIR COMPRESSOR | The characteristics determined by the partial pressure of water vapor in compressed air and the temperature of compressed air are used for cooling,... |
 |
Oil Free Air Compressor | The entire series of CMN oil free compressor in chinaare certified by German TUV Rheinland for oil-free, in cordinate with level of Class 0. Unlike... |
 |
OIL INJECTED SCREW COMPRESSOR | The advantages of CMN oil injected screw compressorare reflected in its outstanding energy-saving effect and variable frequency performance. The un... |
 |
Special Gas Compressor | Based on the low compression temperature characteristics of the water-lubricated air end and the natural advantages of corrosion resistance of the ... |
Same products
 |
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole Fr4 PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/3.5mil Inner l... |
 |
2 Layer OSP Impedance Control Half Hole PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 2 Surface finish: OSP Base material: FR4 Outer Layer W/S: 6/4mil Thickness:... |
