.

Special Gas Compressor

Based on the low compression temperature characteristics of the water-lubricated air end and the natural advantages of corrosion resistance of the stainless steel air end, CMN has developed various pure oil-free special process gas compressor, including hydrogen compressors, coal bed methane compressors, Carbon dioxide compressors, biogas compressors, natural gas compressors, etc. are widely used in the exhaust gas recovery process in the petroleum and petrochemical industry, and are safe, energy-saving and efficient.

WHAT CAN YOU DO WITH CMN SPECIAL GAS COMPRESSOR

The special process compressoris an explosion-proof and anti-corrosion gas source equipment among the special gas source technology products. The product uses special material components and is equipped with explosion-proof motors, explosion-proof electronic controls, explosion-proof sensing and control components. Process gas compressor is a special process product manufactured and tested in strict compliance with the standards of the military nuclear power quality assurance system.

Special gas explosion-proof compressors are mainly used in biogas, nitrogen, methane, propane, natural gas, ammonia, argon, liquefied gas, petroleum associated gas, ethylene, propylene, ethyl chloride, ethylene oxide, ethylidene fluoride, and carbon monoxide , carbon dioxide and other toxic and harmful media industries

WHY DO YOU CHOOSE CMN SPECIAL GAS COMPRESSOR?

The entire series of CMN special gas compressors has obtained explosion-proof certification. Compared with traditional piston compressors, the water-injection screw air end has incomparable advantages in compressing flammable and explosive gases, including: the water injected screw air end has low temperature , usually does not exceed 45 degrees Celsius, while the compression cavity temperature of the piston compressor is above 100 degrees during operation, which poses certain safety risks. At the same time, isothermal compression makes the water-injection screw host more efficient and consumes less energy.

For more information about process gas compressor workingand oil free screw compressor pdf, please feel free to contact us!



Send product request

To: CMN Technology Co.,Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

NATURAL GAS COMPRESSOR
NATURAL GAS COMPRESSOR Coalbed methane compressor are mainly devices with water injected screw compressors as the air end, which are used in coal mine gas recovery, natur...
REFRIGERATED AIR DRYER FOR AIR COMPRESSOR
REFRIGERATED AIR DRYER FOR AIR COMPRESSOR The characteristics determined by the partial pressure of water vapor in compressed air and the temperature of compressed air are used for cooling,...
Oil Free Air Compressor
Oil Free Air Compressor The entire series of CMN oil free compressor in chinaare certified by German TUV Rheinland for oil-free, in cordinate with level of Class 0. Unlike...
OILLESS SCROLL TYPE AIR COMPRESSOR
OILLESS SCROLL TYPE AIR COMPRESSOR CMN scroll style compressorhas an air supply pressure of 2 to 12 bar, a gas production volume of 255 to 1660L/min, and an ultra-quiet design. CMN o...
Oil Injected Air Compressor
Oil Injected Air Compressor Oil Injected compressorare widely used in various industries to provide compressed air power. CMN oil injected screw air compressor adopts patented...
All supplier products

Same products

Heavy Copper PCB Manufacturer
Heavy Copper PCB Manufacturer Seller: Xinfeng Huihe Circuits Co., Ltd. Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material...
8 Layer ENIG Half Hole Custom PCB
8 Layer ENIG Half Hole Custom PCB Seller: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay...
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board Seller: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay...
4 Layer ENIG Impedance Control Half Hole Fr4 PCB
4 Layer ENIG Impedance Control Half Hole Fr4 PCB Seller: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/3.5mil Inner l...
2 Layer OSP Impedance Control Half Hole PCB
2 Layer OSP Impedance Control Half Hole PCB Seller: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 2 Surface finish: OSP Base material: FR4 Outer Layer W/S: 6/4mil Thickness:...