Quartz Blanks
Quartz Blanks
This material consists of single-crystal right-handed a-quartz artificially grown bars which is intended for use in fabrication of piezoelectric for such as timing frequency control and frequency selection under hydro-thermal condition on a seed with its length along the Y axis.
piezo single crystal blank Product Parameters
|
Material |
Quartz Blanks（ Piezo Grade） |
|
Materials |
Both Pure Z and Y Bar available |
|
Synthetic Q-Value |
Min 1.8x10^6, 2.4x10^6 to 3.0x10^6 IEC |
|
Etch Channel Density |
Max 10/c㎡, Max 30/c㎡, Max 100/c㎡, Max 100/c㎡, Max 300/c㎡; Swept |
|
Inclusions Density |
Ia, Ib, I, II, III |
|
Cut Type |
AT, BT, CT, DT, GT, NT, FC, SC, IT, …, etc |
|
Angle Tolerance(±) |
Theta Angle: ±5″， ±10″， ±15″， ±30″， ±1′, ±2′, … , etc |
|
Phi Angle:±5′, ±10′, ±15′, ±30′, … , etc |
|
|
Diameter For Round Blank |
From 3.0mm to 50.80mm (with flat) |
|
Size For Square Blank |
|
|
Size For SMD Blank |
|
|
Diameter/Size Tolerance(±) |
±0.01 mm |
|
Frequency |
1 Mhz up to 54Mhz for AT-Cut Fundamental; Upto 70Mhz By Etching |
|
Flat |
As request the flat shall be perpendicular to X axis within ±10 deg |
|
Surface Finishing |
#1000(9u); #2000(7u); #3000(5u); #4000(3u) (Sic); Polished(Cerium oxide）and & etched Std |
|
Overtone |
Fundamental; Third Overtone (3rd); Fifth Overtone (5th) |
|
Contouring (Diopter) |
Plano-Convex: 0.5 Diopter ～ 10 Diopter Bi-Convex: 10 Diopter ～ 15 Diopter |
If you have any question on LN wafer, LT wafer, saw filters, piezo single crystal blanks, bio sensor and optical grade lithium tantalate wafers, We will give the professional answers to you.
Send product request
Other supplier products
 |
Fe doped LT Wafers | Fe doped LT Wafers Our abundance experience at growing and mass production for SAW grade Lithium Tantalate. We are equipped with advanced faciliti... |
 |
Quartz Blanks | Quartz Blanks This material consists of single-crystal right-handed a-quartz artificially grown bars which is intended for use in fabrication of p... |
 |
SAW Grade Lithium Niobate Wafers | SAW Grade Lithium Niobate Wafers Our abundance experience at growing and mass production for SAW grade Lithium Niobate crystal wafers. We are equi... |
 |
Optical Grade Lithium Niobate Wafers | Optical Grade Lithium Niobate Wafers Our abundance experience at growing and mass production for Optical grade Lithium Niobate. We are equipped wi... |
 |
Optical Grade Quartz Wafers | Optical Grade Quartz Wafers Our abundance experience at growing and mass production for optical grade quartz . We are equipped with advanced facil... |
Same products
 |
DWDM Add and Drop Mux Demux | Seller: Guangzhou Sintai Communication Co.,LTD | What Is OADM? The DWDMmultiplexercard launched by Sintai Communication Co., Ltd is generally use... |
 |
DCM | Seller: Guangzhou Sintai Communication Co.,LTD | What Is Dispersion Compensation Fiber Dispersion Compensation Module (DCM) is designed to fix th... |
 |
Aggregation & Distribution System | Seller: Guangzhou Sintai Communication Co.,LTD | Aggregation & Distribution System Sintai Aggregation & Distribution System offers 32*100... |
 |
CWDM Mux Demux | Seller: Guangzhou Sintai Communication Co.,LTD | 4CH CWDM Mux Demux 01- 4CH CWDM DWDMMux Demux CWDM Coarse Wave Division Multiplexing (CWDM) Mul... |
 |
CWDM Add and Drop Mux Demux | Seller: Guangzhou Sintai Communication Co.,LTD | CWDM Add and Drop Mux Demux The add-drop multiplexing passive wavelength division card launche... |
