Series Glass & Fused Silica Wafers
Series Glass & Fused Silica Wafers
CQT uses a variety of glass and quartz depending on the application and material requirements. Our designers and engineers are skilled at working with any number of glass and quartz materials to machine and fabricate precision optical products such as fused quartz parts for optics, fused silica parts used in fiber optic applications, and borosilicate glass parts found in semi-conductor manufacturing.
Product Parameters
The general specs are as follows sheet, if your specified is not included with it, you may freely tell us and we’ll pleased to customize them for you.
Find here details of CQT selling lithium niobate wafer, lithium tantanlate wafer, piezo single crystal blanks and glass substrates for biochemistry.
|
spec |
unit |
6" |
8" |
10" |
12” |
|
Diameter/size(or square) |
mm |
150 |
200 |
250 |
300 |
|
Tolerance (±) |
mm |
||||
|
Thickness |
mm |
||||
|
Primary reference flat |
mm |
Semi-notch |
Semi-notch |
Semi-notch |
|
|
LTV (5mmx5mm) |
µm |
< 0.5 |
< 0.5 |
< 0.5 |
< 0.5 |
|
TTV |
µm |
< 3 |
<3 |
<5 |
<5 |
|
Bow |
µm |
±30 |
±40 |
±40 |
±40 |
|
Warp |
µm |
≤ 40 |
≤ 50 |
≤ 50 |
≤ 50 |
|
PLTV(5mm*5mm)<0.4um |
% |
≥95% |
≥95% |
≥95% |
≥95% |
|
Edge Rounding |
mm |
||||
|
Surface Type |
|
||||
|
Polished side Ra |
nm |
||||
|
Back Side Criteria |
µm |
CQT dedicated to produce series glass wafers, fused silica wafers, SAW grade lithium tantalate wafers, optical grade lithium tantalate wafers, SAW grade lithium niobate wafers, optical grade lithium niobate wafers. CQT is a leading Chinese manufacturer who involves in piezoelectric crystals, surface acoustic wave filters and the single crystal growth.
Process capability:
|
Item |
Capability |
|
Diameter |
5mm - 400mm |
|
Thickness |
50μm or more |
|
Dimensional Tolerance |
+/- 25μm |
|
Thickness Tolerance |
+/- 5μm |
|
Thickness Variation(TTV) |
< 2μm |
|
Flatness |
1/10 Wave/Inch |
|
Surface Roughness (RMS) |
<5Ǻ |
|
Scratch and Dig |
10/5 |
|
Particle Size |
<10μm |
|
Bow/Warp |
<10μm |
Send product request
Other supplier products
 |
Optical Grade Lithium Niobate Wafers | Optical Grade Lithium Niobate Wafers Our abundance experience at growing and mass production for Optical grade Lithium Niobate. We are equipped wi... |
 |
Quartz Blanks | Quartz Blanks This material consists of single-crystal right-handed a-quartz artificially grown bars which is intended for use in fabrication of p... |
 |
Series Glass & Fused Silica Wafers | Series Glass & Fused Silica Wafers CQT uses a variety of glass and quartz depending on the application and material requirements. Our des... |
 |
Optical Grade Quartz Wafers | Optical Grade Quartz Wafers Our abundance experience at growing and mass production for optical grade quartz . We are equipped with advanced facil... |
 |
SAW Grade Lithium Niobate Wafers | SAW Grade Lithium Niobate Wafers Our abundance experience at growing and mass production for SAW grade Lithium Niobate crystal wafers. We are equi... |
Same products
 |
Canon EOS 5D Mark IV DSLR Camera (Body Only) | Seller: Rock Enterprise Co Ltd | •30.4MP Full-Frame CMOS Sensor •DIGIC 6+ Image Processor •3.2" 1.62m-Dot Touchscre... |
 |
B series Push-pull connector compatible Lemo connector FGG Plug | Seller: Shenzhen Medplus Electronic Tech Co., Ltd | Straight plug, locating pin (G or J), cable clamp, PEEK housing And sheathed tail cover; ... |
 |
Compatible LEMO connector, B series Push-Pull Connectors,2 Pins circular plug | Seller: Shenzhen Medplus Electronic Tech Co., Ltd | Straight plug, locating pin (G or J), cable clamp, PEEK housing And sheathed tail cover. Industr... |
 |
ABB DTCA721A 3EST92-481 | Seller: Moore Automation Limited | Want to buy best parts with a competitive price ? Please check it with mailto:unity@mvm... |
 |
ABB DTDX707A 61430001-WG | Seller: Moore Automation Limited | Want to buy best parts with a competitive price ? Please check it with mailto:unity@mvm... |
