BLIIOT Modbus RTU over TCP Power failure and network fault monitoring alarm
RTU5028E is network status and power supply status monitoring device which can effectively judge and distinguish whether the device is disconnected from network failure, disconnection or power failure, it adopts intelligent calculation method. It can be set to automatically restart or remotely restart. It supports SMS, MQTT protocol, and it has built-in rechargeable lithium battery backup battery. It is widely used in base stations, computer rooms, transportation equipment, construction site cameras, bank ATM machines, etc.
Other supplier products
|
|
Distributed Modbus TCP I/O coupler |
BL200 is compact and small distributed Modbus IO coupler which widely used in industrial site. It adopts embedded hardware, the main frequency is 3... |
|
|
4AI 4-20mA Analog Input Module M3041 |
The IO modules are integrated with the BL200 serial Edge I/O Controller to form a complete I/O SystemsThe M Series IO modules are very important pa... |
|
|
Modbus RTU Over TCP Sensor IoT102 |
IoT102isultralowpower4GremoterelaycontrolmodulewhichcanbecontrolledremotelybyIoTcloudplatform.Ithasonerelayinterface.Itissmallandadoptslowpowerdesi... |
|
|
Cellular IoT Gateway for Security Alarm System |
蜂窝物联网网关 S475/S475E 是一款工业级、高可靠性、高稳定性和可编程远程终端单元 (RTU)。它嵌入了32位高性能微处理器MCU，内置工业蜂窝模块。它提供 8 个数字输入、6 个模拟（超高 24 位分辨率）或 PT100 电阻温度检测器 (RTD) 输入、4 个继电器输出、1 个用于... |
|
|
BLIIoT analog io module |
M330T is industrial remote Ethernet IO module that has one Ethernet port, one RS485, eight AI interface. It supports MQTT, Modbus TCP and Modbus RT... |
All supplier products
Same products
