BLIIOT Modbus RTU over TCP Power failure and network fault monitoring alarm
RTU5028E is network status and power supply status monitoring device which can effectively judge and distinguish whether the device is disconnected from network failure, disconnection or power failure, it adopts intelligent calculation method. It can be set to automatically restart or remotely restart. It supports SMS, MQTT protocol, and it has built-in rechargeable lithium battery backup battery. It is widely used in base stations, computer rooms, transportation equipment, construction site cameras, bank ATM machines, etc.
Other supplier products
|
|
4G wireless communication Photovoltaic IoT Gateway BL110 for collect inverter to thingsboard Cloud |
Industrial IoT Gateway BL110 used to convertModbus, Modbus TCP, DLT645, PLC, BACnet MS/TP, BACnet/IP and other industrial protocols toMQTT, OPC UA,... |
|
|
Cellular Temperature Data Logger Supports 8 Temp Inputs S266 |
BLIIoT GSM/3G/4G LTE S266 Data Loggers are special for remote monitoring the onsite temperature. Not only for monitoring Temperature in real-time, ... |
|
|
PLC Modbus DLT645 to MQTT OPC UA IoT Gateway for boiler monitoring |
Industrial IoT Gateway BL110 provides 1 WAN, 1 LAN, 1 RS232, 3 RS485, 1 CAN interfaces, and also supports 4G wireless communication and GPS positio... |
|
|
BLIIoT BACnet system digital building DDC controller to cloud BL103 |
BL103是物联网网关，可用于将BACnet、Modbus、DLT645转换为BACnet IP、MQTT、OPC UA、Modbus TCP协议，然后通过4G或以太网连接到云平台。可接入华为云、阿里云、Thingsboard、AWS等云平台。支持RS485通讯，可同时采集100台设备4000... |
|
|
Industrial M2M router support WiFi both AP mode and Client mode |
R10 is industrial edge computing router that has one LAN, one WAN(Can be used as LAN port), and one RS485 interface, and with WIFI function. Beside... |
供应产品
Same products
