HYDAC Electronic Pressure Transmitter for shipbuilding and offshore HDA 3400 HDA 3700 HDA 4000 HDA3000 HDA7000 HDA8000
This pressure transmitter, which has been specially developed for shipbuilding and offshoreapplications, is based on a very
robust DMS sensor cell. All parts in contact with the fluid are in stainless steel, and are welded together. Since no seals are required
in the sensor chamber, leakage is eliminated. The 4 .. 20 mA output signal in two conductor technique enables connection to the relevant evaluation electronics. Areas of application are pressure monitoring on marine transmissions, diesel engines, pumps and general hydraulic and pneumatic systems.
Technical Specifications:
Input dataHDA 3400
Measuring ranges16; 60; 100; 250; 400; 600 bar
Overload pressure200 % FS, max. 900 bar
Burst pressure400 % FS
Mechanical connectionG1/4 A DIN 3852
Torque ratingapprox. 20 Nm
Parts in contact with mediaStainless steel, Seal: FPM
Output data
Curve deviation at max. setting to !à0.5 %FS typ
DIN16086 (accuracy class) !à1 %FS max
Curve deviation at min. setting !à0.25 %FS typ
(B.F.S.L.) !à0.5 %FS max
Temperature compensation !à0.15 %FS/10K typ
zero point !à0.25 %FS/10K max
Temperature compensation !à0.15 %FS/10K typ
over range !à0.25 %FS/10K max
Linearity at max. setting to DIN 16086 !à0.15 %FS typ !à0.3 %FS max
Hysteresis !à0.2 %FS typ !à0.4 %FS max
Repeatability !à0.1 %F
Rise timeapprox. 1 ms
Long-term drift !à0.3 %FS typ. / yea
Ambient conditions
Nominal temperature range 0 .. +70 !a
Operating temperature range-25 .. +85 !a
Storage temperature range-40 .. +100 !a
Fluid temperature range-40 .. +100 !a
EN 50081-1 and EN 50081-2
mark
EN 50082-1 and EN 50082-2
Vibration resistance 5 .. 25 Hz: 3.2 mm
25 .. 100 Hz: 4g
Safety type to DIN 40050IP 65
Other data
Supply voltage10 .. 30 V
Residual ripple supply voltage 5 %
Reverse polarity protection of theavailable
supply voltage, excess voltage,
override and short circuit protection
Life expectancy> 10 million cycles
0 .. 100 %FS
Weightapprox. 145 g
This pressure transmitter has been specially developed for shipbuilding and offshore applications and is based on the HDA 4000 series. By using ceramic measurement cells, absolute and relative pressure measurements can be made in the low pressure range. Stainless steel measurement cells are used for measuring in the high pressure range.
The Digital Display Unit HDA 5500 is a microprocessor controlled display and monitoring unit designed for control panel mounting. Different versions are available with a maximum of 3 analogue inputs and 4 relay outputs. The analogue input signals are displayed according to the measuring scale selected by the user. Each of the 4 relay outputs can be allocated to each of the 1 to 3 sensor inputs or to the differential between input 1 and 2. The PT100 temperature probe can be connected directly to the unit.
The pressure transducer series HDA 4100 is equipped with a ceramic pressure measurement cell with thick-layer DMS, which was specially developed for absolute pressure measurement in the low-pressure range
The The pressure transducer series HDA 4300 is equipped with a ceramic pressure measurement cell with thick-layer DMS, which was specially developed for relative pressure measurement in the low-pressure range.
The pressure transducer series HDA 4400 is equipped with a pressure measurement cell with thin-film DMS on a stainless steel diaphragm.
The pressure transducer series HDA 4700 is equipped with a very accurate and robust sensor cell with a thin-film DMS on a stainless steel diaphragm.
The pressure transducer series HDA 4800 is equipped with a very precise and robust sensor cell with a thin-film DMS on a stainless steel diaphragm.
The pressure transducer series HDA 7400 unites outstanding technical data with very small, compact installation form.
The pressure transducer series HDA 8400 was specially developed for series utilisation, e.g. in mobile applications.
The pressure transducer series HDA 8700 was specially developed for series utilisation, e.g. in mobile applications.
The pressure transmitter seriesHDA 9000 has been specially developed for low pressure applications in the industrial and mobile sectors. The transmitters are available in various pressure ranges from 0 .. 1 bar to 0 .. 100 bar. For integration into modern controls,
standard analogue output signals are available, e.g. 4 .. 20 mA, 0 .. 5 V, 1 .. 6 V or 0 .. 10 V. Ratiometric output signals are also
available. For the electrical connection, different types of integrated connections are available. A typ.,combined with a small temperature drift, ensures a broad range of applications for the HDA 9300, e.g. in pump and compressor controls, refrigerating
plants and air conditioning, or for pilot controls in the mobile sector.
Special features: Outstanding performance in terms
of temperature effect and EMC Very compact design
Technical data:
Input data
Measuring ranges 1; 1.6; 2.5; 4; 6; 10; 16; 25; 40; 60; 100 bar
-1 .. 1; -1 .. 4 bar
Overload pressures 2; 5; 8; 12; 20; 32; 50; 80; 120; 200; 200 bar
3.2; 12 bar
Burst pressures 3; 7.5; 12; 18; 30; 48; 75; 120; 180; 300; 300 bar
4.8; 18 bar
1)
G1/4 A DIN 3852 (20 Nm)
Mechanical connection
(Torque value) 1/4-18 NPT, external thread (40 Nm)
7/16-20 UNF 2A (15 Nm)
9/16-18 UNF 2A (20 Nm)
Parts in contact with medium
Measuring cell: Ceramics
Output data
e.g.: 4 .. 20 mA, 0 .. 5 V, 1 .. 6 V, 0 .. 10 V,
Output signal
ratiometric: 0.5 .. 4.5 V for U
= 5 V DC
B
Accuracy to DIN 16086,
max. setting
Accuracy at minimum setting
Temperature compensation
zero point
Temperature compensation
over range
Non-linearity at max. setting
to DIN 16086
Hysteresis
Repeatability
Rise time
Environmental conditions
Compensated temperature range
2)
Operating temperature range
2)
Fluid temperature range
- mark EN 61000-6-1 / 2 / 3 / 4
3)
- mark
Vibration resistance according to
DIN EN 60068-2-6 at 5 .. 2000 Hz 100 g / 6 ms / half-sine
DIN EN 60068-2-27 500 g / 1 ms / half-sinus
Protection class to IEC 60529 IP 65, IP 67 (depending on electrical connection) IP 69K (depending on electrical connection)
Other data
Electrical connection M12x1, 4 pol.
Deutsch DT 04, 3 pole
EN 175301-803 (DIN 43650), 3 pole + PE 8 .. 36 V DC
12 .. 36 V DC for 0 .. 10 V,
Residual ripple of supply voltage
Weight ~ 100 g
Other supplier products
All supplier products
Same products
