Cast Iron Surface Plate for Inspection
Material: HT200-300
Standard: GB/T22095-2008
Specification: 200x200-3000x8000mm or customize
Surface: flat (accessories are available according to your requirement, like V, T, straight-shaped slots and tapped holes, long holes, grid lines, etc.)
Hardness of the working surface: HB160-240
Surface treatment: hand-scraped, finish-milling or ground finish
Foundry process: sand casting or centrifugal casting
Molding type: resin sand molding
Painting: primer and face painting
Surface coating: pickling oil and plastic-lined or covered with anticorrosion paint
Surface flatness: Master, Working, Reference
Precision grade: 0-3
Working temperature: (20±5)℃
Packaging: plywood box
Send product request
Other supplier products
 |
Granite Square Ruler | Material: granite Standard: JB/T 10027-99 Specification: 160x160-500x500mm or customize Hardness of the working surface: HS70 Surface treatment... |
 |
Granite Parallel Gauge | .Granite Parallel Gauge Granite Parallel Gauge Material: granite Specification: 160x25x16-630x100x63mm or customize Hardness of the working surface... |
 |
3D flexible welding table | Technical parameters: 3D welding table—— D28 series Material: cast iron or steel 5 precision machined working surfaces Hole diamete... |
 |
Cast Iron Bed Plate | Material: HT200-300 Standard: GB/T22095-2008 Specification: 200x200-3000x8000mm or customize Surface: flat (accessories are available according to... |
 |
Cast Iron Surface Plate for Measuring | Material: HT200-300 Standard: GB/T22095-2008 Specification: 200x200-3000x8000mm or customize Surface: flat (accessories are available according... |
Same products
 |
Industrial Stainless Steel Gauge | Seller: Ningbo Huben Instrument Co.,Ltd | Industrial Stainless Steel Gaugeis ideally suited for uses on equipment where excessive vibration... |
 |
Valve Tappet Eddy Current Flaw Detector QMTZET-04 | Seller: Nanjing BKN Automation System Co.,LTD | Tappet full automatic eddy current testing system is a full automatic crack hardness sorter that ... |
 |
QTXET-01 Ball Studs Eddy Current Sorting Machine | Seller: Nanjing BKN Automation System Co.,LTD | There are two main types of ball studs: one is a combination of a spherical pin and an integral b... |
 |
GSET-551 Steel Wire Eddy Current Flaw Detector | Seller: Nanjing BKN Automation System Co.,LTD | GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction Using the eddy current signal... |
 |
Eddy Current Testing Equipment for Tube, Bar and Wire | Seller: Nanjing BKN Automation System Co.,LTD | ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic f... |
