Classification of Humidity Meter Gauge
Hair humidity meter gauge
The length of hair and some synthetic fibers varies with the relative humidity of surrounding gases: the longer the relative humidity is, the longer the length is. Using this principle, a hair hygrometer can be made. When the length of synthetic fibers changes with the change of relative humidity, the position of the pointer will be changed by mechanical transmission mechanism. The hygrometer has simple structure and is widely used in meteorological measurement.
Lithium humidity meter gauge
The hygrometer has a thin layer of lithium chloride coating on its surface, which absorbs water vapor from the surrounding gas and conducts electricity. The higher the relative humidity of the surrounding gas, the higher the water absorption of lithium chloride, and the smaller the resistance between the two electrodes. Therefore, the relative humidity of the surrounding gas can be reflected by the current of the electrode. Such hygrometers are widely used in industrial processes.
Wet-dry bulb humidity meter gauge
Usually, a wet-dry bulb hygrometer consists of two glass thermometers located adjacent to each other. One of the thermometers is wrapped with a nylon mesh and the other end of the mesh is immersed in water. Due to the capillary effect, the mesh sleeve around the thermostat is always in a wet state. When water evaporates on the surface of the mesh sleeve, the heat absorption decreases the temperature of the mesh sleeve.
Thus, the temperature indicated by this thermometer (called wet-bulb thermometer) is lower than that indicated by another thermometer (called dry-bulb thermometer) without a net cover. The lower the relative humidity of the surrounding gas is, the faster the net sheath evaporates water, and the greater the temperature decrease. According to the temperature difference and the dry bulb temperature, the relative humidity of the surrounding gas can be found from the reference table attached to the instrument. The hygrometer has simple structure and is mainly used for meteorological measurement and indoor air humidity measurement.
Alumina humidity meter gauge
Its working principle is that the alumina film can absorb water from the surrounding gas and cause the change of its capacitance and resistance. The range of change is used to express the relative humidity of the surrounding gas. This kind of hygrometer is mainly used to measure the humidity of industrial process gases. It can measure the relative humidity in a wide range.
Hangzhou Zetian Technology is committed to the integrity, strength and quality of our air quality monitor. We're internationally recognized. Welcome you to visit us.
Send product request
Other supplier products
 |
WDet-5000 Total Phosphorus Online Automatic Analyzer | HANGZHOU ZETIAN TECHNOLOGY CO., LTDwas established in 2008, and as a fast-growing company specialized in environmental pollution monitoring and i... |
 |
Continuous Emission Monitoring System | Zetian technology is the only high and new technology company with a full set of intellectual property rights of flue gas monitoring. Its independe... |
 |
AM-5100 SO2 Analyzer | Overview Of Portable SO2 Analyzer AM-5100 is a portable SO2 analyzeradopts ultraviolet fluorescence technique and combines advanced micro processin... |
 |
HM-200 Hygronom | Overview Hygronom is used to measure the humidity of flue gas emitted by pollution sources. According to measured humidity, it converts wet gas con... |
 |
CODet-5000 CODcr Online Automatic Analyzer | Overview Of CODet-5000 CODcr Automatic Online Cod Analyzer CODet-5000 is a new self-developed online COD measurement equipment, based on the global... |
Same products
 |
UV Detector | Seller: Xinsheng Pharmaceutical Instrument Co., Ltd | The ultraviolet-visible dual-wavelength detector features high sensitivity and a wide linear rang... |
 |
Fabric ici pilling and snagging box | Seller: Standard International Group (HK) Limited | Fabric ici pilling and snagging boxis composed of the same speed motor drive, and to maintain the... |
 |
Martindale Abrasion And Pilling Tester | Seller: Standard International Group (HK) Limited | To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are ... |
 |
Circular Locus Pilling Tester | Seller: Standard International Group (HK) Limited | Testing Standards: GB/T 4802.1. JIG 040-1990 Product Information: The Circular Locus Pilling... |
 |
Bean Bag Snag Tester | Seller: Standard International Group (HK) Limited | Bean Bag Snag Tester, to determine the snagging and picking resistance of knitted and woven fabri... |
