Classification of Humidity Meter Gauge
Hair humidity meter gauge
The length of hair and some synthetic fibers varies with the relative humidity of surrounding gases: the longer the relative humidity is, the longer the length is. Using this principle, a hair hygrometer can be made. When the length of synthetic fibers changes with the change of relative humidity, the position of the pointer will be changed by mechanical transmission mechanism. The hygrometer has simple structure and is widely used in meteorological measurement.
Lithium humidity meter gauge
The hygrometer has a thin layer of lithium chloride coating on its surface, which absorbs water vapor from the surrounding gas and conducts electricity. The higher the relative humidity of the surrounding gas, the higher the water absorption of lithium chloride, and the smaller the resistance between the two electrodes. Therefore, the relative humidity of the surrounding gas can be reflected by the current of the electrode. Such hygrometers are widely used in industrial processes.
Wet-dry bulb humidity meter gauge
Usually, a wet-dry bulb hygrometer consists of two glass thermometers located adjacent to each other. One of the thermometers is wrapped with a nylon mesh and the other end of the mesh is immersed in water. Due to the capillary effect, the mesh sleeve around the thermostat is always in a wet state. When water evaporates on the surface of the mesh sleeve, the heat absorption decreases the temperature of the mesh sleeve.
Thus, the temperature indicated by this thermometer (called wet-bulb thermometer) is lower than that indicated by another thermometer (called dry-bulb thermometer) without a net cover. The lower the relative humidity of the surrounding gas is, the faster the net sheath evaporates water, and the greater the temperature decrease. According to the temperature difference and the dry bulb temperature, the relative humidity of the surrounding gas can be found from the reference table attached to the instrument. The hygrometer has simple structure and is mainly used for meteorological measurement and indoor air humidity measurement.
Alumina humidity meter gauge
Its working principle is that the alumina film can absorb water from the surrounding gas and cause the change of its capacitance and resistance. The range of change is used to express the relative humidity of the surrounding gas. This kind of hygrometer is mainly used to measure the humidity of industrial process gases. It can measure the relative humidity in a wide range.
Hangzhou Zetian Technology is committed to the integrity, strength and quality of our air quality monitor. We're internationally recognized. Welcome you to visit us.
在线联系供应商
Other supplier products
 |
WDet-5000 Total Phosphorus Online Automatic Analyzer | Overview WDet-5000 is a self-developed total phosphorus on-line monitoring instrument. This product is based on the global initiative magnetic cond... |
 |
HM-200 Hygronom | Overview Hygronom is used to measure the humidity of flue gas emitted by pollution sources. According to measured humidity, it converts wet gas con... |
 |
EQMS VOCs Online Monitoring System | What is 2.5 monitor? Volatile Organic Compounds (VOCS) are carbon based compounds that pose a significant health hazard due to their toxicity. VOCs... |
 |
Water Quality Analyzers | Hangzhou Zetian Technology Co., Ltd. is the only water analysis equipment manufacturer in China that has five analytical technology platforms inclu... |
 |
AM-5100 SO2 Analyzer | Overview AM-5100 SO2 air analyzer equipmentadopts ultraviolet fluorescence technique and combines advanced micro processing technology, which could... |
Same products
 |
iX361 中框校正夹 | 卖方: 深圳维客修有限公司 | Fixes iCF6/iA3/iX16/iX361手机屏幕中框维修治具。iFixes iCF6免加热开屏器用于手机液晶拆解无需加热。iFixes iX361中框矫正维修平台。iFixes IA3... |
 |
单相电表测试仪 | 卖方: 782364 | GF112D是一种单相手持式电子电表测试装置，精度等级为0.05、0.1或0.2，用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V，也可用于测试交流参数—&mda... |
|
|
单相电表测试仪 | 卖方: 782364 | GF112D是一种单相手持式电子电表测试装置，精度等级为0.05、0.1或0.2，用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V，也可用于测试交流参数—&mda... |
|
|
单相电表测试仪 | 卖方: 782364 | GF112D是一种单相手持式电子电表测试装置，精度等级为0.05、0.1或0.2，用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V，也可用于测试交流参数—&mda... |
 |
数字轨距 | 卖方: Wuhan linkage track equipment co.,ltd | 产品描述 数显轨头磨损仪主要用于测量钢轨的垂直磨损和横向磨损，设计合理，重量轻，操作方便，读数直观。 特征 1.数字直读式：LCD显示屏，清晰易读;无需计算，直接读数;读数时，按住... |
