Hexapod Tumbler test machine
Introduction
The steel ball or the hexagonal feet randomly roll in the rotating drum, which is covered with carpet textile samples. Observe the appearance of change according to the standard requirements after the test. It provide the realistic pile condition due to its reciprocating mechanism.
Application
The Hexapod Tumbler Tester is a popular apparatus used in the evaluation of the appearance retention of carpets. Provides a rapid method of test – completion within one working day.
The drum uses a reversing mechanism to give more realistic pile disturbance, and the required number of revolutions may be preset on a revolution counter. The 3.8kg tumbler has six polyurethane stud feet. These six feet can be replaced If they are damaged, severe wear or after two-years’ application.
Technical Parameters
| Items | Parameters |
|---|---|
| Inner diameter | 305mm±1mm |
| Wall thickness | 8mm |
| Internal depth | 200mm±1mm |
| Counting interval | 0-999999 |
| Nail number | 6 |
| Rotation speed | 35±2r/min |
| Dimension | 450mm(W)*420mm(H)*780mm(L) |
| Power supply | 220AC，50Hz |
| Weight | 85Kg |
| Total quality of polyurethane screw | 3.8kg |
| Diameter of screw | 40mm |
| Height of screw | 15mm |
| Aspect of screw | 15mm |
| Thickness of backing plate | 3mm±0.25mm |
| Shore hardnessof foot nails | 85-100 |
Send product request
Other supplier products
 |
Vehicle Cabin Air Filter Tester | Applicable standards: DIN 71460-1 Road vehicles - Air filters for passenger compartments of motor vehicles - Part 1: particulate matter filtration... |
 |
Shoelace wear tester | Main uses: Shoelace wear tester is mainly used to evaluate the durability and wear resistance of shoelaces. In the test, the LACES are usually fix... |
 |
Safety Helmet Impact Acceleration Tester/ Helmet Impact Testing Machine / helmet impact acceleration tester | Purpose This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance p... |
 |
Taber Abrasion Tester (Double-Head) | Standards: 1. DIN 53754 Testing of plastics; determination of abrasion, abrasive disk method 2. DIN 53109 Testing of paper and board; determinat... |
 |
Paper ring compression strength tester | Paper ring compression strength tester - Other test instrument - standard Product Introduction: Intelligent cardboard edge compression strength t... |
Same products
 |
UV Detector | Seller: Xinsheng Pharmaceutical Instrument Co., Ltd | The ultraviolet-visible dual-wavelength detector features high sensitivity and a wide linear rang... |
 |
Fabric ici pilling and snagging box | Seller: Standard International Group (HK) Limited | Fabric ici pilling and snagging boxis composed of the same speed motor drive, and to maintain the... |
 |
Martindale Abrasion And Pilling Tester | Seller: Standard International Group (HK) Limited | To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are ... |
 |
Circular Locus Pilling Tester | Seller: Standard International Group (HK) Limited | Testing Standards: GB/T 4802.1. JIG 040-1990 Product Information: The Circular Locus Pilling... |
 |
Bean Bag Snag Tester | Seller: Standard International Group (HK) Limited | Bean Bag Snag Tester, to determine the snagging and picking resistance of knitted and woven fabri... |
