Foam Indentation Fatigue Testing Machine

Purpose:

This machine is used to measure the indentation hardness of porous elastic materials. The polyurethane foam sample can be tested according to the national standard, and the compressive hardness of sponge, foam and other materials can be accurately measured. In addition, it can also be used to measure the specified compression hardness of the seat foam (such as backrest, seat cushion foam, etc.)， and accurately measure the compression hardness of each foam part of the seat.

How it Works:

The sponge foam compression stress test puts the sample between the upper and lower pressure disks, and when the upper pressure disks compress the sample of A certain size down to the concave degree specified by the A method (B method, C method) required by the national standard at the specified speed, the load element on the load cell will feedback the induced pressure to the controller for processing and display, so as to measure the collapsibility hardness of the sponge, foam and other samples.

Functional characteristics：

1. Automatic zero clearing: After receiving the test start instruction, the system automatically clears zero.

2. automatic return: after the sample is broken, it will automatically return to the initial position.

3. change the speed: The machine can change the test speed arbitrarily according to different samples.

4. indicating value verification: the system can achieve the accurate calibration of force value.

5. control method: According to the test needs can choose the test force, test speed, displacement and other test methods.

Standards:

ISO 2439: Flexible cellular polymeric materials — Determination of hardness (indentation technique)

ISO 3386-1: Polymeric materials, cellular flexible — Determination of stress-strain characteristic in compression

ASTM D3574:Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams

DIN 53576

JIS K6400-6

Technical parameter：

1. control mode: touch screen control;

2. induction mode: precision load element;

3. capacity: 200kg;

4. unit switch: Kg, N, LB;

5. pressure plate: diameter 200mm, bottom rounded R1mm;

6. lower platform: 420×420mm, porosity diameter 6mm, spacing 20mm;

7. the maximum stroke: 75mm;

8. test speed: 100±20mm/min;

9. power source: servo motor;

10. transmission mode: precision ball screw;

11. power source: single-phase, 220V, 50Hz/60Hz, 2.5A;

12. Weight: 160kg.

Other supplier products

	Protective Clothing Vertical Flame Spread Tester BS EN ISO 15025:2002	Standards: BS EN ISO 15025:2002 Applications: The instrument is applied for the testing of fire hazard using com-bustible materials, like fabric...
	Paper stiffness meter	Paper stiffness meter - Other test instrument - standard Product Introduction: ZY-TDY300 microcomputer bending stiffness tester is used to measur...
	vertical flame test chamber	Standards: ASTM D6413, CALIF TB117, DOC-FF 3/71, 16CFR Parts1615/1616, FTMS 191-5903, CPAI 84 Applications: The vertical burning of textil...
	Zipper Comprehensive Strength Testing Machine	Meet the standard: ASTM D2061 ASTM D2060 BS 3084 JIS S3015 DIN 3419 Product Introduction: The mechanical strength of a zipper's components i...
	Thermal - Cold Cycle Testing Machine/ Cold and Hot Cycle Tester / Environmental Thermal Cycling Tester	Standard BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber). Adaptive Certification...

All supplier products

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...