ZINC ALLOY INGOT
Introduction
Zinc alloysare alloys based on zinc and containing other elements.Common alloying elements are aluminum, copper, magnesium, cadmium, lead, titanium and other low temperature zinc alloys.Zinc alloyhas low melting point, good fluidity, easy fusion welding, brazing and plastic processing, corrosion resistance in the atmosphere, the crippled material is easy to recover and remelting;However, the creep strength is low and it is easy to change the size due to natural aging.Melting preparation, die - casting or pressure processing into wood.
According to the manufacturing process can be divided into cast zinc alloyand deformation zinc alloy.The main additions to zinc alloys are aluminum, copper and magnesium.Zinc alloys can be divided into deformation and casting zinc alloys according to processing technology.Cast zinc alloy with good fluidity and corrosion resistance, suitable for die casting instruments, automobile parts and other shell.
ZINC ALLOY INGOTSpecies
Traditional die casting zinc alloys are 2, 3, 4, 5, 7 alloys, the most widely used is no. 3 zinc alloy.In the 1970s, za-8, za-12 and za-27 were developed.
Zamak 3: good fluidity and mechanical properties.
Used for castings with low mechanical strength requirements, such as toys, lamps and lanterns, decorations, and some electrical appliances.
Zamak 5: good fluidity and good mechanical properties.
Used for castings with mechanical strength requirements, such as auto parts, mechanical parts, electrical components.
Zamak 2: used for mechanical parts with special requirements for mechanical properties, high requirements for hardness, good wear resistance and general requirements for dimensional accuracy.
ZA8: it has good impact strength and dimensional stability, but poor liquidity.
Used in die casting small size, precision and high mechanical strength requirements of the workpiece, such as electrical components.
Superloy: best fluidity for die-casting thin wall, large size, high precision, complex shape workpiece, such as electrical components and box body.
ZINC ALLOY INGOT supplierUse
Suitable for die-casting instruments, toys, lamps, decorations, electrical components and box bodies, auto parts, mechanical and electrical parts, mechanical parts, etc.
Zinc alloy: an alloy based on zinc and containing other elements.Common alloying elements are aluminum, copper, magnesium, cadmium, lead, titanium and other low temperature zinc alloys.Zinc alloy has low melting point, good fluidity, easy fusion welding, brazing and plastic processing, corrosion resistance in the atmosphere, the crippled material is easy to recover and remelting;However, the creep strength is low and it is easy to change the size due to natural aging.Melting preparation, die - casting or pressure processing into wood.According to the manufacturing process can be divided into cast zinc alloyand deformation zinc alloy.
Send product request
Other supplier products
 |
COBALT METAL PIECE | COBALT METAL PIECE The development of cobalt In the case of cobalt, the ancient greeks and Romans used its compound to make colored glass to produc... |
 |
ALUMINUM SCRAP | ALUMINUM SCRAP Introduction pre disposal waste aluminumis a common name for recycled aluminum. After pretreatment, part of the recovered aluminum w... |
 |
ALUMINUM ALLOY INGOT | ALUMINUM ALLOY INGOT Introduction Aluminum alloyis a kind of nonferrous metallic building materialwidely used in industry, and has been widely used... |
 |
ALUMINUM INGOT | Aluminum ingotfor remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196... |
 |
COPPER WIRE SCRAP | COPPER WIRE SCRAP Introduction Good electrical and thermal conductivity. In life, copper wireis used as a conductor.Good electrical conductivity, a... |
Same products
 |
Ti6Al4V ELI Titanium Sheet IS05832-3 | Seller: Shaanxi Huatainuo Metal Limited Company | Ti6Al4V ELI Titanium Sheet IS05832-3 Product Inspection Produce the medical titanium platewith ... |
 |
Ti-6Al-4V ELI Titanium Wire ASTM F136 | Seller: Shaanxi Huatainuo Metal Limited Company | Ti-6Al-4V ELI Titanium Wire ASTMF136 Grade：Gr5, Ti-6Al-4V ELI.Standard： ISO5832-3, ASTM F136.Dia... |
 |
Ti-6Al-4V Titanium Rods ASTM F136 | Seller: Shaanxi Huatainuo Metal Limited Company | Ti-6Al-4V Titanium Rods ASTM F136 Grade:Gr5, Ti-6Al-4V, Gr23, Ti-6Al-4V ELI Standard:ASTM F136,... |
 |
Ti-6Al-4V ELI Titanium Bar ASTM F136 | Seller: Shaanxi Huatainuo Metal Limited Company | Ti-6Al-4V ELI Titanium Bar ASTM F136 ASTM F136 Ti-6Al-4V ELI Titanium Bar / Rodis our main produ... |
 |
Titanium Bar Manufacturer for Medical & Industrial Applications | Seller: Shaanxi Huatainuo Metal Limited Company | Titanium Bar Manufacturer for Medical & Industrial Applications As a professionaltitanium ba... |
