ZINC ALLOY INGOT
Introduction
Zinc alloysare alloys based on zinc and containing other elements.Common alloying elements are aluminum, copper, magnesium, cadmium, lead, titanium and other low temperature zinc alloys.Zinc alloyhas low melting point, good fluidity, easy fusion welding, brazing and plastic processing, corrosion resistance in the atmosphere, the crippled material is easy to recover and remelting;However, the creep strength is low and it is easy to change the size due to natural aging.Melting preparation, die - casting or pressure processing into wood.
According to the manufacturing process can be divided into cast zinc alloyand deformation zinc alloy.The main additions to zinc alloys are aluminum, copper and magnesium.Zinc alloys can be divided into deformation and casting zinc alloys according to processing technology.Cast zinc alloy with good fluidity and corrosion resistance, suitable for die casting instruments, automobile parts and other shell.
ZINC ALLOY INGOTSpecies
Traditional die casting zinc alloys are 2, 3, 4, 5, 7 alloys, the most widely used is no. 3 zinc alloy.In the 1970s, za-8, za-12 and za-27 were developed.
Zamak 3: good fluidity and mechanical properties.
Used for castings with low mechanical strength requirements, such as toys, lamps and lanterns, decorations, and some electrical appliances.
Zamak 5: good fluidity and good mechanical properties.
Used for castings with mechanical strength requirements, such as auto parts, mechanical parts, electrical components.
Zamak 2: used for mechanical parts with special requirements for mechanical properties, high requirements for hardness, good wear resistance and general requirements for dimensional accuracy.
ZA8: it has good impact strength and dimensional stability, but poor liquidity.
Used in die casting small size, precision and high mechanical strength requirements of the workpiece, such as electrical components.
Superloy: best fluidity for die-casting thin wall, large size, high precision, complex shape workpiece, such as electrical components and box body.
ZINC ALLOY INGOT supplierUse
Suitable for die-casting instruments, toys, lamps, decorations, electrical components and box bodies, auto parts, mechanical and electrical parts, mechanical parts, etc.
Zinc alloy: an alloy based on zinc and containing other elements.Common alloying elements are aluminum, copper, magnesium, cadmium, lead, titanium and other low temperature zinc alloys.Zinc alloy has low melting point, good fluidity, easy fusion welding, brazing and plastic processing, corrosion resistance in the atmosphere, the crippled material is easy to recover and remelting;However, the creep strength is low and it is easy to change the size due to natural aging.Melting preparation, die - casting or pressure processing into wood.According to the manufacturing process can be divided into cast zinc alloyand deformation zinc alloy.
在线联系供应商
Other supplier products
 |
ANTIMONY INGOT | Antimony ingot, commonly known as refined antimony. Use ANTIMONY INGOT supplieris mainly used as the hardener of alloy for metallurgy, storage batt... |
 |
ALUMINUM ALLOY INGOT | ALUMINUM ALLOY INGOT Introduction Aluminum alloyis a kind of nonferrous metallic building materialwidely used in industry, and has been widely used... |
 |
CATHODE COPPER | CATHODE COPPER Quality requirements for cathode copper: copper concentrateis produced by electrolytic refining or electrolytic deposition. Use of e... |
 |
ALUMINUM SCRAP | ALUMINUM SCRAP Introduction pre disposal waste aluminumis a common name for recycled aluminum. After pretreatment, part of the recovered aluminum w... |
 |
ALUMINUM BAR | Aluminum barcan be used in aviation, aircraft construction, rivet, trailer wheel, the propeller components, metallic building material, forging mat... |
Same products
 |
钼电极 | 卖方: Shaanxi Peakrise Metal Co., Ltd. | 密度：10.2g/cm3 纯度：99.97％ 直径：4~120mm 长度：200~2000mm 表面：抛光 标准：ASTM B387 拉伸强度：≥900MPa 拉伸强度：≥900MP... |
 |
Chain Link Fence | 卖方: Hebei Shineyond Metal Products Co.,Ltd | Also known as diamond wire mesh, sloping square mesh. Hooked wire mesh is made by crocheting, its... |
 |
Torsion Spring Clip | 卖方: ningbo atlas metal hardware co ltd | Torsion Spring Clip We manufacture close tolerance parts with complex geometries, intricate deta... |
 |
Torsion Spring | 卖方: ningbo atlas metal hardware co ltd | Torsion Spring A torsion springis a spring that works by twisting its end along its axis; that i... |
 |
Threaded Parts | 卖方: ningbo atlas metal hardware co ltd | Threaded Parts We have rich experience in machining stainless steel, Titanium alloy, aluminium, ... |
