Tungsten Rod
HSG METAL is a professional tungsten rod manufacturer and tungsten rod factoryin China. Pure tungsten rod is made of 99.95% tungsten powder. Its physical properties are as follows: density 19.3g/cm3, melting point (liquid) 3422°C, conductivity 30% IACS Min, hardness 69HRA Min. The forging and annealing process results can be obtained by test. It possesses special properties such as low thermal expansion with good thermal conductivity, adequate resistance to electrical resistance, and high elastic modulus. The products made from tungsten are widely used in various fields, such as support line, lead line, printer needle, all kinds of electrodes and quartz furnace, filament, high-speed tools, auto products, sputtering target material, heating device with special properties. It is generally made by powder metallurgy.
HSG Metal is an experienced tungsten rod manufacturerin China. If you are looking for a reliable tungsten rod factory, contact us today for the latest tungsten rod price!
Application of Tungsten Rod
Tungsten rods possess special properties, such as low thermal expansion with good thermal conductivity, adequate resistance to electrical resistance, and high elastic modulus. Therefore, tungsten rods are widely used in various fields. Such as support line, lead line, printer needle, various electrodes and quartz furnace, filament, high speed tools, automotive automatic products, sputter target material.
As a professional tungsten rod manufacturer in China, HSG Metal specializes in the production of high-quality tungsten rods. We have been providing top-tier tungsten rods to our customers from all over the world. If you are looking for a tungsten rod factory, contact us now!
Application of Tungsten Rod
Production Process of Tungsten Rod
Different average forging ratios and forging methods were used to draw the sintered pure tungsten bar, and the annealed tungsten bar was annealed under different annealing systems. The microstructure and physical and mechanical properties of the samples were analyzed by metallographic microscope, hardness tester and density tester. The results showed that:
- ℃, the average forging ratio should be less than 32%.
When the total forging ratio is about 80%, the recrystallization of the tungsten rod forged at one end of one fire is basically completed after annealing at 1300℃ for 30 min, while the recrystallization of the tungsten rod forged at both ends of one fire is completed after annealing at 1350℃ for 60 min when the average forging ratio is larger. After annealing, the hardness of tungsten bars with the two forging processes will decrease, and the hardness of tungsten bars with the former process is less than that with the latter process before annealing and at the early stage of annealing, and this difference is no longer obvious with the completion of recovery recrystallization.
Features of Tungsten Rod
The surface of sintered tungsten rod is silver-gray metallic luster;
The surface of the forging tungsten rod has a layer of oxide, the surface is black;
Polished tungsten rod, silver gray metallic luster.
Send product request
Other supplier products
 |
Minor Metals | Non-ferrous metals are divided into basic metals and minor metals. Minor metals are called minor metals because they are relatively small units. ... |
 |
Cobalt Metal | Cobalt Metal for Sale Cobalt is a shiny steel-gray metal, relatively hard and brittle, ferromagnetic, heated to 1150℃ magnetic disappear. The comb... |
 |
Niobium Rod | Niobium and niobium alloy rods are used as structural materials and all kinds of aviation engine rocket nozzle, the reactor internal components and... |
 |
Ferro Molybdenum | Ferro molybdenum is a ferroalloy composed of molybdenum and iron, generally containing 50-60% molybdenum, with a high ferro molybdenum melting poin... |
 |
Tungsten Scrap | High-quality tungsten scrap for saleat HSG! In today's tungsten industry, an important symbol to measure the technology, scale and comprehensive... |
Same products
 |
Metal Insulated Composite Panel Systems | Seller: Zhejiang Leboom Energy Conservation Technology Co., Ltd | Metal Insulated Composite Panel Systems The system is composed of fire-resistant composite metal... |
 |
AluzincMg-Al-Zn Alloy Composite Panel Systems | Seller: Zhejiang Leboom Energy Conservation Technology Co., Ltd | AluzincMg-Al-Zn Alloy Composite Panel Systems Introducing magnesium aluminum zinc composite pane... |
 |
Aluminium Insulated Composite Panel Systems | Seller: Zhejiang Leboom Energy Conservation Technology Co., Ltd | Aluminium Insulated Composite Panel Systems This system features composite panels manufactured i... |
 |
3D Aluminium Composite Panel Systems | Seller: Zhejiang Leboom Energy Conservation Technology Co., Ltd | 3D Aluminium Composite Panel Systems The 3D Aluminium Composite Panelutilizes aluminum alloy she... |
 |
Calcium Silicate Board Integrated Exterior Wall Insulation | Seller: Zhejiang Leboom Energy Conservation Technology Co., Ltd | Calcium Silicate Board Integrated Exterior Wall Insulation and Decoration Panel Leboomoffers hig... |
