Automatic Pipe Saw Machine

Features of Pipe Saw

Hydraulic operated pipe saws, especially used for the preparation of pipe segments in PE, PP and other thermoplastic materials for the production of bends, tee and other manufacturing. the reduction rate of the saw is hydraulically controlled like the belt clamp used for fixing the pipe section. The saw blade is made in Germany.

Hydraulically raised and lowered cutting cycle;

67-degree maximum cutting angle allows the production of segments for bends, tees and Y-branch tees;

Angular cutting error equal to or less than 1 degree;

Speed of saw blade 195m/min;

Pipe clamping straps.

Types of automatic plastic tube cutting machinefor Sale

LHC 315 Pipe Saw

LHC315 pipe saw is used for the production of bends, tees and other fabrications and for the production of Bends, Tees, crosses, Y and other fabrications.

LHC 800 Pipe Saw

LHC800 hydraulically operated pipe saw specifically produced for the preparation of pipe segments in PE, PP and other thermoplastic materials, used for the production of Bends, Tees, Cross, Y and other fabrications.

LHC 1200 Pipe Saw

LHC1200 hydraulically operated pipe saw specifically produced for the preparation of pipe segments in PE, PP and other thermoplastic materials, used for the production of Bends, Tees, Cross, Y and other fabrications.

LHC 1600 Pipe Saw

LHC1600 hydraulically operated pipe saw is specially used to prepare pipe sections of PE, PP and other thermoplastic materials, and is used to manufacture elbows, tees, crosses, Y-shaped pipes, etc.

LHC 2000 Pipe Saw

LHC2000 hydraulically operated pipe saw is specially used to prepare pipe sections of PE, PP and other thermoplastic materials, and is used to manufacture elbows, tees, crosses, Y-shaped pipes, etc.

FAQs of Pipe Saw

Malfunction analyzes:

① Pipes cannot be clamped.

② Pressure relay is not adjusted well.

③ The clamping cylinder is leak.

Solutions:

① Adjust the clamping pressure;

② Adjust the pressure relay;

③ Replace the oil ring

Malfunction analyzes

① System pressure is too high or low;

② Throttle valve is adjusted improperly;

③ Controllable cheek valve is adjusted improperly.

Solutions

① Adjust the system pressure;

② Adjust the throttle valve;

③ Adjust the single direction valve.

Malfunction analyzes

① The overflow valve core is blocked

② Oil filter is blocked.

③ Overflow valve core is blocked

Solutions

① Disconnect & wash or change the overflow valve

② Wash the oil filter.

③ Disassemble and clean the overflow valve core.

As one of the mostprofessional plastic pipe welding machine suppliers, we provide plastic tube cutting machine, pe pipe fusion welding machine, china plastic pipe welding machineand etc. Want to know more? Contact us.

Other supplier products

	Butt Welding Machine	Features of Butt Welding Machine Butt Welding Machine is suitable for butt fusion of plastic pipes made of PE, PP, and PVDF material. It has Certi...
	Plastic Pipe Welding & Cutting Machines	Electric Welding Equipment The electric welding machine is the special equipment for PE pipe electric melting welding. It can supply constant weld...
	Manual Butt Welding Machine	Features of Manual Butt Welding Machine LHM Series Manual butt welding machines are suitable for PE & PP pipes and fittings on the building si...
	LHM 160 Manual Butt Welding Machine	LHM Series Manual poly pipe welding machineare suitable for PE & PP pipes and fittings on the building site and in the factory, with high-quali...
	Automatic Pipe Saw Machine	Features of Pipe Saw Hydraulic operated pipe saws, especially used for the preparation of pipe segments in PE, PP and other thermoplastic material...

All supplier products

Same products

	Medical Plastic Parts	Seller: Packson Mold Co.,Ltd	Project Management To be a qualified medical plastic components manufacturer, the most advanced ...
	PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics	Seller: Suzhou Anmei Material Technology Co., Ltd	PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol...
	PA66 GF	Seller: Suzhou Anmei Material Technology Co., Ltd	Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif...
	Nylon6 PA6	Seller: Suzhou Anmei Material Technology Co., Ltd	Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o...
	Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics	Seller: Suzhou Anmei Material Technology Co., Ltd	Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a...