Lacquered Drum Plug
Lacquered barrel bung plugsis G2 and G3/4 steel drum plugswith lacquered resins for better resistance to the drum filers, such as food contact, solvent corrosion and high temperature. XEAL® lacquered closures enable its application to wider industries.
The fine-controlled lacquer layer on drum plug does not easily fall off during screwing into drum flange. Such good adhesion is achieved by many factors such as base pre-treatment, spraying equipment, oven control and final treatment.
Details of Lacquered Drum Plug
1
There are mainly three types of lacquer resin applied either to the inner side of steel drum or on outer outside of drum closure. Phenolics, epoxy phenolics and PVF, while there is also top side lacquered on drum plug for extreme environmental conditions.
2
There are golden brown, green and golden yellow etc lacquered, those are from selections of PPG2088, DuPont R78433, Axalta, RDL, Resco lacquer or their substitutes.
There are many drum cap seal suppliers, but we are one of the best choices for you.
For more information about barrel plug types, please feel free to contact us!
Send product request
Other supplier products
 |
PLASTIC SPOUT CAP | Plastic spout capsare commonly used in small metal or plastic containers. Its main function is to help dispense liquid products accurately. The maj... |
 |
Lacquered Drum Flange | Lacquered drum flangeis produced based on spraying coating layer onto zinc plated drum flange. Coated drum flange will be baked in oven at high tem... |
 |
PLASTIC BUNG | Plastic barrel bung plugshas different sizes and thread designs to meet varied sealing requirements of steel drums and plastic drums. Steel drum re... |
 |
PLASTIC BUNG | Plastic bung has different sizes and thread designs to meet varied sealing requirements of steel drums and plastic drums. Steel drum requires plast... |
 |
INSERTION DIE & CAPPING MACHINE | Drum flange dieand drum plug are essential parts in the steel drum industry. Together they act as sealing and opening components for steel drum use... |
Same products
 |
Medical Plastic Parts | Seller: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... |
 |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... |
 |
PA66 GF | Seller: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... |
 |
Nylon6 PA6 | Seller: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... |
 |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |
