Lacquered Drum Plug
Lacquered barrel bung plugsis G2 and G3/4 steel drum plugswith lacquered resins for better resistance to the drum filers, such as food contact, solvent corrosion and high temperature. XEAL® lacquered closures enable its application to wider industries.
The fine-controlled lacquer layer on drum plug does not easily fall off during screwing into drum flange. Such good adhesion is achieved by many factors such as base pre-treatment, spraying equipment, oven control and final treatment.
Details of Lacquered Drum Plug
1
There are mainly three types of lacquer resin applied either to the inner side of steel drum or on outer outside of drum closure. Phenolics, epoxy phenolics and PVF, while there is also top side lacquered on drum plug for extreme environmental conditions.
2
There are golden brown, green and golden yellow etc lacquered, those are from selections of PPG2088, DuPont R78433, Axalta, RDL, Resco lacquer or their substitutes.
There are many drum cap seal suppliers, but we are one of the best choices for you.
For more information about barrel plug types, please feel free to contact us!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Buttress Plastic Bung | Buttress bungis with coarse thread, as well as 2'' NPT plastic bung with fine thread, designing for induatrial plastic drums, HDPE barrels, plastic... | |
Drum Paint Cap | Drum paint cap is a type of cap used during production of steel drum. Its main function is to prevent paint entering drum inside during drum painti... | |
Drum Lock Ring | Drum lock ring is a reliable sealing component for open head steel drum, open head plastic drum and fibre drum. It seals the drum lid and drum body... | |
Steel Drum Plastic Bung | Steel Drum Plastic Bung Steel drum plastic bung is G2 and G3/4'' plug type with ISO-228 thread, can well suit into drum flange on 55 gallon steel ... | |
DRUM PUMP | Drum pump is the essential tool to take contents out of the drum container. They enable drum users' handling works in a simple and effective way. D... |
Похожие товары
Medical Plastic Parts | Продавец: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... | |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | Продавец: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... | |
PA66 GF | Продавец: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... | |
Nylon6 PA6 | Продавец: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... | |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | Продавец: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |