Zinc Plated Drum Plug
Zinc plated drum plug is G2 and G3/4 round shape bungs which screw into drum flange, those are equipped with gasket of BUNA, EPDM, PE, Viton or irradiated poly gasket performing well in helium leakage test under different conditions, and provide a standard sealing system for steel drum containers.
Aiming at against corrosion, zinc plated with passivisation in Chrome 3 or Chrome 6 is the most common surface treatment of drum flange and drum plug. Our zinc plating technique enables closures keep non-rust over 96 hours in salt spray test.
Details of Zinc Plated Drum Plug
1
High grade steel is the critical and basic step to produce uniform and exquisite drum plugs. We are using 1.2mm thickness cold rolled steel sheet from big steel mills, with enough tensile and high stamping performance.
2
The total 6 welding points are to increase the strengthen of the attachments, withstand higher torque when wrench applied for better sealing purpose.
3
A special slope design of plug makes the gasket not easily extruded out when the drum plug is tightened onto drum flange under the proper torque.
Every piece of drum plug will go through the leakage inspection machine before packaging. We are always making efforts to keep the filers in steel drums safe.
As a professional cap seal manufacturer, we provide bung cap, drum bung gaskets, drum vent caps, 2 inch bung plug, 55 gallon barrel plugs, 55 gallon drum plug, etc. For more information, please feel free to contact us!
Send product request
Other supplier products
Drum Lock Ring | Drum lock ring is a reliable sealing component for open head steel drum, open head plastic drum and fibre drum. It seals the drum lid and drum body... | |
Buttress Plastic Bung | Buttress bungis with coarse thread, as well as 2'' NPT plastic bung with fine thread, designing for induatrial plastic drums, HDPE barrels, plastic... | |
PLASTIC BUNG | Plastic bunghas different sizes and thread designs to meet varied sealing requirements of steel drums and plastic drums. Steel drum requires plasti... | |
Drum Locking Ring | Drum lock ring is a reliable sealing component for open head steel drum, open head plastic drum and fibre drum. The plastic drum locking ringand st... | |
Steel Drum Plastic Bung | Steel drum plastic bung is G2 and G3/4'' plug type with ISO-228 thread, can well suit into drum flange on 55 gallon steel drums. It is a substitute... |
Same products
Medical Plastic Parts | Seller: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... | |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... | |
PA66 GF | Seller: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... | |
Nylon6 PA6 | Seller: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... | |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |