PA6 GF20 Heat Stabilized (A1006D, A1016D) for Engineering Plastics
PA6 GF 20has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always been producing reliable PA6 GF20 products for many years. We can provide you with the best chemical material. If you need high-quality PA6 GF20, you can fill out the form below to connect with us.
Benefits of PA6 ABSGF20
Flame retardant pa material
Semi crystalline thermoplastic
Good impact strength and stiffness
Good low temperature performance
Outstanding wear resistance
Good temperature resistance
The degradation of thermal oxidation is reduced
Improved long-term heat and stability to ultraviolet and visible light
PA6 GF20 Application
The automotive industry using PA6 GF20 includes many components, such as automotive dashboard, exterior panel, interior trim panel and steering Panels, soundproof panels, door locks, bumpers and air ducts. In terms of electrical appliances, PA6 GF20 is widely used in refrigerators, televisions, washing machines, air conditioners, computers, copiers and other electronic appliances.
In terms of building materials, PA6 GF20 is widely used in packaging, furniture, sports and entertainment products, machinery and instrumentation industries.
Typical Application of PA6 GF20 heat stabilized (A1006D)
Glass fiber 20% PA6 reinforced (25% GF is workable as well) can be used for heat-resistant and high-strength structural parts such as machinery, auto parts, power tools, coil frames, engine covers, etc.
Other Details of PA6 GF20 heat stabilized (A1006D)
Physical Property of PA6 GF20
Ash |
(15.0% 1 ISO3451/1) |
Conditioned |
600°C*2h |
Density |
(1250Kg/m3 1 ISO1183) |
Conditioned |
23°C |
Shrinkage Parallel Flow |
(0.5-0.7 % 1 ISO294-4) |
Shrinkage Vertical Flow |
(0.7-1.1% I ISO294-4) |
Mechanical Propertiesof PA6 GF20
Tensile strength(125.0MPa 1 ISO527) Conditioned |
5mm/ min |
Tensile Strain at Break(2.5% I ISO527) Conditioned |
|
Notched Impact Strength(125 0MPa I ISO527) Conditioned |
2mm/min |
Flexural Strength(190MPa 1ISO178) Conditioned |
2mm/min |
Flexural Modulus(5700 MPa I ISO178) Conditioned |
5mm/ min |
Thermal Propertyof PA6 GF20
Melting Point |
(220°C I ISO11357) |
Hot Deformation Temperature |
(175*C I ISO75) |
Conditioned |
|
Flammability Class |
(HB 1UL94) |
Conditioned |
mm |
Injection Molding Conditionsof PA6 GF20
Drying Temperature |
130°C |
Drying Time |
3h |
Cylinder Temperature |
240-260°C |
Nozzle Temperature |
240-260*C |
Tooling Temperature |
80*C |
* Molding conditions arejustfor reference, please make an adjustment based on the actual situation!
As an engineering plastic company, we can offer sorts of modified plasticfor sale, if you have needs, please contact us.
Send product request
Other supplier products
PA66 GF30 Heat Stabilized (A2006F, A2016F) for Engineering Plastics | Polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. Typical Application of pa6 6 gf30Heat Stabilized (A2006... | |
Anmei-TPU Flame Retardant for Engineering Plastics | Anmei-TPU Flame Retardant for Engineering Plastics TPU thermoplastic polyurethane elastomer is a type of polyurethane elastomer. It not only has t... | |
PA66 GF15 With High Tensile Strength (A2307C, A2317C) for Engineering Plastics | PA66GF15is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding. Typical Application of PA66 GF15With High Tensile St... | |
PA6 GF15 With High Tensile Strength (A1307C, A1317C) for Engineering Plastics | PA6 GF15with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Applicatio... | |
ABS Engineering Plastic in Anmei | ABS resin is a terpolymer composed of acrylonitrile, butadiene and styrene. ABS has the rigidity, chemical resistance and heat resistance of polyac... |
Same products
Medical Plastic Parts | Seller: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... | |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... | |
PA66 GF | Seller: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... | |
Nylon6 PA6 | Seller: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... | |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |