PTFE Molded Sheet
PTFE Molded Sheet
PTFE is divided into molded plate and turning plate two categories. The molded plate is made of PTFE suspension resin by molding and sintering; Turning plate is the blank of PTFE suspension resin formed by molding or hydraulic method and then turning or rotary cutting is worth the plate.
Specification of Molded PTFESheet
Product name |
Specification(mm) |
|||
Square plate(length) |
Circular plate(diameter) |
Thickness |
||
PTFE molded plate |
Molded plate |
≦ 800 |
≦800 |
1-50 |
Big molded plate |
1000̶ 1600 |
1000-1800 |
3-30 |
|
Note: Specific size is available as per customer's requirement |
The Technical Indexes of PTFE Molded Sheet
Product name |
The implementation of standards |
The technical performance index |
Remarks |
||||
The proportion of |
(Mpa) Tensile strength |
(%)Crack elongation |
(KV/mm) |
||||
Witstanding voltage |
|||||||
Molded sheet |
Ordinary type |
ZGB33002 SFB-1 & SFB-2 |
≥15 |
≥150 |
SFB-1≥10 |
||
Bridge use |
JT/T901-2014 |
≥30 |
≥300 |
||||
Skived sheet |
ZBG 33002 SFB-1 & SFB-2 |
≥15 |
≥150 |
SFB-1≥10 |
Usage of PTFE Molded Plate
Can be processed into the lining of chemical anti-corrosion equipment.
All kinds of reaction reactor tower section sealing material.
Anti-stick liner or conveyor belt.
Electrical insulation liner.
Dust removal equipment lining and friction coefficient material.
Bridge support sliding block material.
Feature of PTFE Molded Plate
Ptfe molded plate is characterized by its excellent corrosion resistance, can withstand a variety of acids, alkali, organic solvents and other chemical corrosion, moisture, water absorption, has good aging resistance.
At the same time, it has a very low friction coefficient, making it a self-lubricating material, can operate without lubrication, reduce energy loss, extend service life.
Ptfe molded plate also has high temperature tolerance, can withstand high temperatures of up to 260℃, without any deformation and fracture. This makes it very widely used in high temperature environment, such as in petroleum, chemical, electronic, food and other industries, can play its excellent performance.
As one of ptfe plastic manufacturers, we can offer sorts of ptfe productsfor sale, if you have needs, please contact us.
Send product request
Other supplier products
PTFE Ring | PTFE Ring PTFE sealing products not only can seal oil fluid, can also seal water a class of fluids, including strong acid, strong alkali, strong c... | |
PTFE Ring | PTFE RingPTFE sealing products not only can seal oil fluid, can also seal water a class of fluids, including strong acid, strong alkali, strong c... | |
PTFE Gasket | PTFE Gasket A pure ptfe gasketis a type of sealing component made from PTFE material, which is a synthetic fluoropolymer known for its excellent... | |
PTFE Slide Bearing Plate | PTFE slide bearing platesare made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease groove, machine... | |
Silicone Rubber Products | Silicone rubber is known for its excellent temperature resistance, with the ability to withstand extreme heat and cold without losing its physical ... |
Same products
Medical Plastic Parts | Seller: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... | |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... | |
PA66 GF | Seller: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... | |
Nylon6 PA6 | Seller: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... | |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |