PTFE Slide Bearing Plate

PTFE Slide Bearing Plates

The product is made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease groove, machined into various specifications of sliding block. Has very high compressive strength, low friction coefficient, excellent aging resistance and chemical corrosion resistance, can be used for a long time to -180℃ to 260℃, good weather resistance. The products are widely used in high-speed rail, bridge and light rail projects, and have been recognized by customers in practical use.

The Technical Indexes of PTFE Slide Bearing Plate

Product name	The implementation of standards		The technical performance index				Remarks
			The proportion of	(Mpa) Tensile strength	Crack elongation	Witstanding voltage
Molded sheet	Oridinary type	ZGB33002 SFB-1 & SFB-2		≥15	≥150	SFB-1≥10
	Bridge use	JT/T901-2014		≥30	≥300
Skived sheet	ZGB 33002 SFB-1 & SFB-2			≥15	≥150	SFB-1≥10

Types and Specifications of PTFE Slide Bearing Plate

Name of commodity	Diameter/Length of side(mm)	Thickness(mm)
Round plate	140-1800	2-10
Square plate	2000*2000	2-10

The Main Technical Indicators of PTFE Slide Bearing Plate

Items	Density	Tensile Strength	Elongation at break	Ball indentation hardness H132/60
Unit	g/cm³	Mpa	%	Mpa
JT/T901-2014 Standard		≥30	≥300

Features of PTFE Slide Bearing Plate

Temperature resistance: It is able to work stably between -180°C to +260°C.

Excellent chemical corrosion resistance: Applicable medium includes oil, acid solution and almost all chemical materials.

Excellent non-sticky property: With low friction coefficient it easier to remove those resin, dopes, oil and other sticky things.

Anti-aging, weathering resistance.

Excellent insulation property.

Filled material: Filled PTFE productshas more outstanding performance by adding filler such as carbon, graphite, bronze, glass fiber, carbon fiber, MOS2, PEEK, PI, POB BaSO4, SiO2, glass bead, polyamide.

As a plastic industrial productsmanufacturer, we will do our best to meet all the needs of customers.

Other supplier products

	Carbon Filled PTFE Products	Carbon Filled PTFEProducts PTFE carbon graphiteproducts consist of a blend of carbon particles or fibers mixed with polytetrafluoroethylene (PTFE)...
	Silicone Rubber Products	Silicone rubber is known for its excellent temperature resistance, with the ability to withstand extreme heat and cold without losing its physical ...
	PTFE Machined Parts	PTFE machined partsare custom-made components manufactured from polytetrafluoroethylene material. These parts are created through machining process...
	PTFE Tube/Pipe	PTFE tubes/ pipes from PTFE tube/ pipe supplier are made from polytetrafluoroethylene resin, a synthetic polymer that is highly resistant to heat, ...
	PTFE Corrugated Tube	The process is to make corrugated PTFEtubeat a certain speed through a temperature of 270℃ ~ 280℃ continuous forward rotation mold. It has all the ...

All supplier products

Same products

	Medical Plastic Parts	Seller: Packson Mold Co.,Ltd	Project Management To be a qualified medical plastic components manufacturer, the most advanced ...
	PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics	Seller: Suzhou Anmei Material Technology Co., Ltd	PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol...
	PA66 GF	Seller: Suzhou Anmei Material Technology Co., Ltd	Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif...
	Nylon6 PA6	Seller: Suzhou Anmei Material Technology Co., Ltd	Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o...
	Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics	Seller: Suzhou Anmei Material Technology Co., Ltd	Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a...