Nylon 66 PA66 Heat Stabilized (A2006X01, A2016X01) for Engineering Plastics
Nylon66 PA66 Heat Stabilized Description
Nylon66 PA66 Heat Stabilized a high temperature nylon made by the polycondensation of terephthalic acid and hexamethylene diamine. Heat stabilized nylon 6has the properties of low water absorption, excellent heat resistance, good processing fluidity, low expansion coefficient, and high bonding strength with metals.
The advantages of Anmei heat stabilized nylonare as follows, and it meets the new requirements of new energy vehicles for plastics:
- Comply with relevant regulatory requirements(DPPD-free, no anti-Oxidant Aromatic Amine type additive)
- Long-term heat-resistant stability(Long-term resistance to high temperatures of 190 ° C and 230 ° C, and with high strength)
- Low extractables(Do not block the oil circuit of the capillary structure)
- Electrially Neutral(Do not cause short circuit of the circuit)
- Low warpage
Difference Between Nylon 6 And Nylon 66
PA6 has good toughness and is used in climbing hands, automotive structural parts, etc. PA66 has both toughness and hardness, and is used in industrial gears such as marine propellers.
As a professional engineering plastic supplier, Anmei grouphas high-quality modified plastics for sale. Welcome to contact us if needed.
Send product request
Other supplier products
 |
PA66 GF15 With High Tensile Strength (A2307C, A2317C) for Engineering Plastics | PA66GF15is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding. Typical Application of PA66 GF15With High Tensile St... |
 |
Nylon6 PA6 | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one of the professional nylon 6 suppliers/manufacturers... |
 |
PA66 GF20 Halogenated FR (A2014D, A2114D) for Engineering Plastics | Nylon 66, filled with 20% of glass fiber and flame resistance halogens, are extruded by Coperion twin-screw extruder is PA66 GF20halogenated FR. ... |
 |
PA6 GF in Anmei | As an engineered plastics company, Anmei focuses on the production of modified engineering plastics, among which high-performance nylon 6 engineeri... |
 |
Masterbatch | We are here to be your reliable partners of Color Masterbatch. Color masterbatches are widely used in polyethylene(PE), polypropylene(PP), polysty... |
Same products
 |
Medical Plastic Parts | Seller: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... |
 |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... |
 |
PA66 GF | Seller: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... |
|
|
Nylon6 PA6 | Seller: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... |
 |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |
