PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics
PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding.
PA66 15 GFStorage and Handling
PRE-PROCESSING：
Pre-drying: 4-6h / 130°C
Processing:
Melting temperature 280 - 300 °C
Mold temperature 60 - 100 °C
Product storage and handling:
PA is a highly hygroscopic material. When the dry PA materialis exposed to the atmosphere, it will absorb moisture quickly, so it is recommended to keep it sealed. In order to ensure the best performance index after extrusion, the material must be dried before processing, and the moisture content of the particles should not exceed 0.02%. It is recommended that the material be dried at 110-130°C for 4~6h.
PA66 GF 15Heat Stabilized (A2006C) Typical Application
PA66 15% glass fiber and heat stabilized modified grades are applied to the sectors of circuit breaker, electrical box shell, water pump housing and cover, offering high rigidity and resistance to thermal deformation.
For more information about modified plastic, please feel free to contact us!
Send product request
Other supplier products
 |
PA6 GF30 Heat Stabilized (A1006F, A1016F) for Engineering Plastics | AnmeiA1006F is a kind of material PA6 GF30, which is the injection grade resin by mixing the 30% glass fiber and heat stabilized polyamide 6. Typi... |
 |
PA6 GF30 Halogen-free FR (A1015F) for Engineering Plastics | PA6 FRis a PA6 with 30% glass-fibers and flame retardant free of halogens. Typical Application of PA6 GF30 halogen-free FR (A1015F) PA6 GF30f... |
 |
PA66 GF30 Halogen-free FR (A2015F) for Engineering Plastics | Material PA66 GF30FR is a PA66 with 30% glass-fibers and flame retardant free of halogens. This type of polyamide PA66 contains stabilization and i... |
 |
Engineering Plastic | We are here to be your reliable partners of modified plastic. Engineering plastic is the high-performance plastic that can apply in different ind... |
 |
PA66 GF45 (A2011I) | PA66 GF45is a 45% glass fiber reinforced polyamide 6.6 with high stiffness and strength. Typical Application of PA66 GF45(A2011I) PA66 45%GF HB... |
Same products
 |
Two-Shot Injection Molds | Seller: WIT MOLD LIMITED | Two-Shot Injection Molds Advantages of two-shot injection molding The benefits of Double Inject... |
 |
precision injection molding | Seller: WIT MOLD LIMITED | precision injection molding Precision injection moldingis a method demanding unparalleled accura... |
 |
Custom Plastic Molds molding | Seller: WIT MOLD LIMITED | Custom Plastic Molds molding Plastic Molds molding servicesprovide many extremely versatile part... |
 |
Negative Pressure Physiotherapy Tank Molds | Seller: Zhuozhou Yihua Mould Factory | The negative pressure tank is a disposable consumable for male negative pressure treatment. This ... |
 |
PLC Casing Molds | Seller: Zhuozhou Yihua Mould Factory | The PLC housingbelongs to a kind of rail electrical module. It not only needs to achieve the fit ... |
