Heater Cooler
Regeneration CoolerRegeneration cooler is developed on the basis of the shell and tube heat exchanger. It is built of round tubes mounted in large cylindrical shells with the tube axis parallel to that of the shell. Also it is widely used as gas cooler, condenser and chemical process.Regeneration Cooler Specifications- 250 bar(3,626 psi)- Max. 1,000 kW(3,414,425 BTU/hr)HEATERHeaterAir Heater converts electrical energy into heat. The heating element consists of electrical resister and work on the principle of Joule heating.Its shape and basic operation is similar to that of most shell and tube heat exchanger.Heater Specifications- 250 bar(3,626 psi)- Max. 1,000 kW(3,414,425 BTU/hr)
Other supplier products
|
|
Steam Heating Pressure Vessel |
Product Description：Autoclave is a large container equipment for sand-lime brick, fly ash bricks, aerated concrete blocks, the new lightweight wall... |
|
|
AIR COOLING |
Lanxing air cooled all-aluminum brazed bar and plate heat exchangers are supplied as a vital component to our mobile and industrial OEMs' products.... |
|
|
Blower Heater Purge Type |
BHP Series – BLOWER HEATER PURGE TYPERegeneration is evaporation by heatingMoisture is evaporated from absorbents in saturation by hot air that was... |
|
|
Fin Tube Heat Exchanger |
Product Description：Fin tube, stainless fin tube, copper fin tube, welded fin tube, spiral fin tube, flange fin tube heat exchanger. Extruded finne... |
|
|
Filter |
Filter-Pre FilterIt filters out moisture, particles and substances from after cooler and/ or separator to prevent contamination of desiccant.-After... |
All supplier products
Same products
