bale cutter
This bale splitter is mainly used to cut the natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber.This bale splitter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system.The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife.
When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber.Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.
Other supplier products
|
|
artificial grass |
1.Introduction: Owing to the prediction limit for sports court, many times one sports court has to meet various demands simultaneously. Especially ... |
|
|
Two Roll Mixing Mill(A) |
The machine main uses are following in rubber product factory: Natural rubber refining, raw rubber and compound mixing. Rubber beating mixing and r... |
|
|
rubber soling sheet for sole |
We can offer you many kinds of rubber sheets for sole. |
|
|
vulcanizing machine |
This vulcanizing machine is used for all kinds of vulcanizing mould, rubber and plastic mould products, and non-mould products.
Being a column stru... |
|
|
bale cutter |
This bale splitter is mainly used to cut the natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be instal... |
All supplier products
Same products
