.

Two Stages Hot Coal Gas Gasifier

Two stages hot gas stationΦ2.0m~Φ4.5m Two stages hot gas station,Website: gas flows in high temperature,more high thermal efficiency,more less phenol water Technological processTwo section type gas generating furnace of gas to air blast of continuous gas: a furnace body water clamping sleeve and phenol water evaporation heat exchanger produced a low-pressure steam and blast air mixture to change the composition of the saturated vapor as gasifying agent (saturation temperature control in 55 to 65 ℃). From the bottom of the gas furnace, the furnace grate into the gasification furnace, and the heat generated by the heat generated by the reaction of the raw coal and the coal in the gasification section. There are nearly 65 per cent of hot gas after within the center pipe and annular furnace wall channels are derived, forming a bottom gas; rest, about 35% of the hot gas directly on the pyrolysis of bituminous coal heating, drying, carbonization, mixed with dry distillation gas formation top gas.(1) the production of the top gasInto the furnace of coal by gasification of hot gas heating first to lose water inside and outside (90 to 150  ℃), and then gradually by dry distillation (150 to 550  ℃) prolapse volatile volatile ingredients for tar, alkane gas, phenols and H2, CO2, CO and H2O mixture. Among them, tar, tar light with top gas to enter the follow-up purification was removed, and alkanes and H2, CO2, CO gas carbonization and gasification of occurred gas mixture to become the top gas.(2) the cooling process of top coal gas purificationTop gas purification treatment process for advanced electrical tar precipitator, between the working temperature for 90 to 150  ℃, removal of heavy tar (tar calorific value up to 82 kcal / kg and above), the yield for different kinds of coal and not, generally 2 to 3.5% of the total furnace coal, high-quality chemical raw materials or fuel.(3) the production of bottom gasThe raw coal was at the bottom of gas carbonization in carbonization zone, formation of semi coke gasification into heat. The volatile components of hot semi coke are generally from 3 to 5%. Semi hot coke due to take off his coal in the active component and gasification activity than bituminous coal is decreased, the gasification intensity is generally up to 270 ~ 350Kg / square meters., two-stage gasifier fire layer temperature is generally 1000 ~ 1300  ℃. Hot semi coke with steam or air mixture occurs the following reaction:C+O2=CO2+408840 thousand Jiao / thousandC+1/2O2=CO+123217 thousand Jiao / thousandCO2+C=2CO-162405 thousand Jiao / thousandH2O =CO+ H2-118821 C+.2H2O =CO2+ 2H2-75237 C+.Bottom gas is completely gasification gas, almost no tar. But with a small amount of dust, the calorific value is generally 1200 to 1300 kcal /Nm3. According to the principle of gasification, high temperature fire layer thickness, gas calorific value also increased, and vice versa.(4) the purification process of bottom gasThe bottom gas enters the cyclone dust collector and the temperature is about 450 ~ 550 ℃Two stages hot gas station process flow diagram


Send product request

To: ZiBo YiFeng Mechanical engineering co.,LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Gas Storage Tank
Gas Storage Tank  Gas storage tank500 m3 ~ 10000 m3 series gas storage tank,Website:, Play important role in supply gas smoothly and adjust the gas consumption Gas ...
Single Stage Cold Coal Gas Gasifier
Single Stage Cold Coal Gas Gasifier  Single stage cold gas stationTechnological processThe air blower of drum boiler water clip 0.26mpa set of self-produced steam by the control valve...
Two Stages Hot Coal Gas Gasifier
Two Stages Hot Coal Gas Gasifier Two stages hot gas stationΦ2.0m~Φ4.5m Two stages hot gas station,Website: gas flows in high temperature,more high thermal efficiency,more less phen...
Single Stage Hot Coal Gas Gasifier
Single Stage Hot Coal Gas Gasifier Single stage hot gas station Φ1.5 m ~Φ4.0 m single stage coal gasifierSINGLE—;STAGE COAL GASIFIER TECHNICAL PARAMETERspecificationparameter itemspe...
All supplier products

Same products

Custom Made Precision CNC Stainless Steel Turning Parts with Laser Marking
Custom Made Precision CNC Stainless Steel Turning Parts with Laser Marking Seller: Dongguan Weimi Hardware Technology Co. Ltd. Dongguan Weimi Hardware Technology Co.,Ltd is one of the leading China turning stainless steel ma...
High USA precision parts/ turning aluminum parts/ cnc turning center parts
High USA precision parts/ turning aluminum parts/ cnc turning center parts Seller: Dongguan Weimi Hardware Technology Co. Ltd. Dongguan Weimi Hardware Technology Co.,Ltd is one of the leading China aluminium turning parts ma...
Custom precision steel CNC milling parts
Custom precision steel CNC milling parts Seller: Dongguan Weimi Hardware Technology Co. Ltd. Weimi Hardware Tech. Company is one of the leading China custom precision steel cnc milling parts...
High Precision CNC Turned Metal Parts for Medical Devices
High Precision CNC Turned Metal Parts for Medical Devices Seller: Dongguan Weimi Hardware Technology Co. Ltd. Dongguan Weimi Hardware Technology Co.,Ltd is one of the leading China turned metal parts manufac...
Precision CNC turning machinery Brass Turned Parts Components
Precision CNC turning machinery Brass Turned Parts Components Seller: Dongguan Weimi Hardware Technology Co. Ltd. Dongguan Weimi Hardware Technology Co.,Ltd is one of the leading China brass component manufactur...