Super Soft Amino Silicone Oil NB-8240
Super Soft Amino Silicone Oil 【Product Name】Super Soft Amino Silicone Oil RH-NB-8240【Introduction】 It is a amino-modified silicone 【Advantage】 Outstanding softness;【Basic Character】Appearance: Colorless to tiny yellow transparent liquidIonic:weak-cationAmino Value: 0.55-0.76mmol/g Viscosity: 300~10000mpa•s【Application】Soft finishing for cotton,Website: and its blended fabric.【Usage amount for reference 】Crude oil emulsification please refer to the emulsification process.(1)Dipping Process: Dilution 1~6%( o.w.f)(2)Padding Process: Dilution 10~50g/l【Package】50 or 120kg/drum【Storage】Store in cool and ventilated warehouse. 6 moths of storage period. Emulsification Process Formulation1.RH-NB-8240 60KG 2.Emulsifier 30KG3.Glacial acetic acid 2kg+12kg water 14Kg 4. Water 200 KG Diluted into 30% silicone emulsion,the meulsion transparent.Process (1).Add RH-NB-8240 and the emulsifier in the container, and start to stir for 5-10min. (2).Add 8Kg water and stir for 5minutes, the add 2kg acetic water ,stir 5-10min. (3).Add 8Kg water and stir for 5minutes, the add 2kg acetic water ,stir 5-10min. (4).Add 8Kg water and stir for 5minutes, the add 2kg acetic water ,stir 5-10min. (5).Add 10Kg water and stir for 5minutes, the add 2kg acetic water ,stir 5-10min. (6).Add 10Kg water and stir for 5minutes, the add 2kg acetic water ,stir 5-10min. (7).Add 20Kg water and stir for 5minutes, the add 4kg acetic water ,stir 5-10min. (8).Add 20kg water stir for 10min. (9).Add the rest water under stirring, stir for 5-10min,make the pH at 6.filtering and packagingSend product request
Other supplier products
Injection Molding Silicone Rubber For Insulator | Injection molding silicone rubber RH-G601Liquid Silicone Rubber for Middle and Low Voltage ResistanceProperty:2-components addition cured liquid si... | |
Neutral Phosphorus-free Soaping Agent RH-NB-2253 | Product Information【Product Name】Soaping Agent RH-2253【Introduction】Soaping Agent RH-2253 is complex of special surfactant,Website:, with good chel... | |
Coating Leveling Agent RH-T1033 | Coating Leveling Agent RH-T1033A silicone coating additives promotes substrate wetting and acts as an anti-cratering additive.Component:polyether m... | |
Vinyl Phenyl Silicone Resin | Vinyl Phenyl Silicone MQ ResinProduct Name:Vinyl Phenyl Silicone MQ ResinSpecifications: AppearanceTransparent liquidViscositycpsVolatile content (... | |
Silicone Gel For Electronic Components Encapsulation | Silicone gel for electronic components encapsulation●Introduction2-Component Addition Cure Silicone Rubber,Website:, colorless clear liquid, vulcan... |
Same products
micronized polyethylene homopolymer for ink manufacturing | Seller: Syntop chemical Co.,Ltd. | MicroF_W168 is a water-based micronized polyethylene homopolymer. The average particle size of M... | |
Kluber LAMORA D220 30ML CP20P Preventive Maintenance Grease | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Thanks & Regards, Nancy Tel / target="_blank"> | |
water treatment grade aluminum chlorohydrate liquid | Seller: Twin International Co., Limited | 50% solution water treatment grade Aluminum Chlorohydrate ACH CAS: 12042-91-0 HS NO.:3824999999... | |
Kluber Isoflex Topas 5051 50ml Original New Grease | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | ISOFLEX TOPAS NCA5051is a beige synthetic long homogeneous and short fiber. It consists of a synt... | |
Mobil DTE 832 ISO VG 32 208L Combined Cycle Turbine Oils | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Mobil DTE832and 846 aresuperior performance turbine oilsdesigned for use in steam turbines, gas t... |