Cover Flux
Cover Flux (SATA-PF-340)
General Description of Cover Flux (SATA-PF-340)
The aluminium melt is extremely easy oxidation and inhale when it is in melting. A cover flux for aluminiumis required to have low melting, low density, good humidity, and can form a dense uniform protective film, which we called it cover flux.
SATA-cover flux is used for covering of molten aluminium, it can form a cover layer on the surface of molten for prevent the molten aluminium react to oxidation.
Application of Cover Flux (SATA-PF-340)
Use Instruction: it can added at one time before refining or it can added in two batches,first add half covering fluxto the molten aluminium and stir the melt and make the flux fully react to molten, then skimming the dross and spread the balance on the surface of the aluminium molten.
Advantage of Cover Flux (SATA-PF-340)
It can prevent the aluminium molten react with oxygen in the air.
It is a eco-friendly flux, less fume during working
It can separate the dross from aluminium molten, reduce metal loss
Low working temperature, suitable for kinds of furnace
Specification of Cover Flux (SATA-PF-340)
White mixed powder.
Aluminium melting temperature: 650-750℃.
Recommended Dosage: 1.5-3kgs/ton aluminium molten, 0.8-1.0kg/m2 of melt area. it should adjust according to the purity and air humidity.
Package:
Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized
Stored in dry, well-ventilated place, and avoid direct sunlight，keep sealed before using.
Package of Cover Flux (SATA-PF-340)
Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.
Stored in dry, well-ventilated place, and avoid direct sunlight，keep sealed before using.
NOTE: This flux has serious hygroscopicity, please use immediately after opening.
Send product request
Other supplier products
 |
Mg Alloy Flux | Magnesium alloyfluxhas a low melting point and small heat capacity. When heated in the air, it gets oxidized fast, and it is easy to burn when over... |
 |
Drossing Flux | Drossing Flux(SATA-PF-310) Description of Drossing Flux (SATA-PF-310) SATA drossing flux is specially developed for removing the slag from the alum... |
 |
Recovery Flux | Application: mainly used for primary aluminium ,aluminium alloy and secondary aluminium. It can be used for remove the floating dross on the surfac... |
 |
granulated-fused-refining-fluxes | General Introduction: SATA granulated fused refining flux is a eutectic salt composed of mgcl2 anhydrous and potassium or sodium chloride. Which ... |
 |
Covering Flux-Csf2 | C sf2 is an alkaline-based, sodium-free flux. It is a smoke-generating cover flux for all aluminum alloys, especially silicon-aluminum. It is used ... |
Same products
 |
Trimellitic anhydride 97% | Seller: Yufeng International Group Co., Ltd | Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a... |
 |
Isobutyric Anhydride CAS 97-72-3 | Seller: Yufeng International Group Co., Ltd | Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo... |
 |
Isobutyric Acid CAS 79-31-2 | Seller: Yufeng International Group Co., Ltd | Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met... |
 |
2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5 | Seller: Yufeng International Group Co., Ltd | AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and... |
 |
Dimethyl sulfoxide (DMSO) CAS: 67-68-5 | Seller: Yufeng International Group Co., Ltd | Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture... |
