Cationic Flocculants
SINOFLOC cationic polyacrylamide powderare co-polymers of acrylamide with increasing proportions of cationic monomers. The cationic groups, which are thus introduced into the polymer, have positive charges in aqueous solution. Our cationic polyacrylamide is available in solid powder and emulsion forms.
Cationic Polyacrylamide (PAM)Specifications
|
Products |
Product Code |
Cationic Charge |
Molecular Weight |
|
Cationic PAM Powder |
SINOFLOC 605 |
Slightly |
High |
|
Cationic PAM Powder |
SINOFLOC 606 |
Slightly |
Very High |
|
Cationic PAM Powder |
SINOFLOC 610 |
Low |
High |
|
Cationic PAM Powder |
SINOFLOC 611 |
Low |
Very High |
|
Cationic PAM Powder |
SINOFLOC 615 |
Low |
High |
|
Cationic PAM Powder |
SINOFLOC 616 |
Low |
Very High |
|
Cationic PAM Powder |
SINOFLOC 620 |
Low/Medium |
High |
|
Cationic PAM Powder |
SINOFLOC 621 |
Low/Medium |
Very High |
|
Cationic PAM Powder |
SINOFLOC 625 |
Low/Medium |
High |
|
Cationic PAM Powder |
SINOFLOC 626 |
Low/Medium |
Very High |
|
Cationic PAM Powder |
SINOFLOC 630 |
Medium |
High |
|
Cationic PAM Powder |
SINOFLOC 631 |
Medium |
Very High |
|
Cationic PAM Powder |
SINOFLOC 635 |
Medium |
High |
|
Cationic PAM Powder |
SINOFLOC 636 |
Medium |
Very High |
|
Cationic PAM Powder |
SINOFLOC 640 |
Medium |
High |
|
Cationic PAM Powder |
SINOFLOC 641 |
Medium |
Very High |
|
Cationic PAM Powder |
SINOFLOC 645 |
Medium |
High |
|
Cationic PAM Powder |
SINOFLOC 646 |
Medium |
Very High |
|
Cationic PAM Powder |
SINOFLOC 650 |
Medium |
High |
|
Cationic PAM Powder |
SINOFLOC 651 |
Medium |
Very High |
|
Cationic PAM Powder |
SINOFLOC 655 |
Medium/Strongly |
High |
|
Cationic PAM Powder |
SINOFLOC 656 |
Medium/Strongly |
Very High |
|
Cationic PAM Powder |
SINOFLOC 660 |
Medium/Strongly |
High |
|
Cationic PAM Powder |
SINOFLOC 661 |
Medium/Strongly |
Very High |
|
Cationic PAM Powder |
SINOFLOC 665 |
Medium/Strongly |
High |
|
Cationic PAM Powder |
SINOFLOC 666 |
Medium/Strongly |
Very High |
|
Cationic PAM Powder |
SINOFLOC 670 |
Strongly |
High |
|
Cationic PAM Powder |
SINOFLOC 671 |
Strongly |
Very High |
|
Cationic PAM Powder |
SINOFLOC 680 |
Very Strongly |
High |
|
Cationic PAM Powder |
SINOFLOC 681 |
Very Strongly |
Very High |
|
Cationic PAM Powder |
SINOFLOC 690 |
Very Strongly |
High |
|
Cationic PAM Emulsion |
SINOFLOC 1209 |
Low |
High |
|
Cationic PAM Emulsion |
SINOFLOC 1409 |
Medium |
High |
|
Cationic PAM Emulsion |
SINOFLOC 1509 |
Medium/Strongly |
High |
|
Cationic PAM Emulsion |
SINOFLOC 1809 |
Very Strongly |
High |
Products Feeding:
The solutions of SINOFLOC cationic polymers must be prepared in suitable plants equipped with dry powders feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC cationic polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a “maturation” time of 60 minutes for the coagulation of water. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific polyacrylamide applications on cationic polymer, please consult with SINOFLOC team.
FAQ
What is the Cationic Charge Range of Sinofloc Cationic Polyacrylamide?
Sinofloc is supplying cationic polyacrylamide powder flocculants with cationic charge ranging from 0-100%.
What is the Main Characteristics of Sinofloc Cationic Polymer?
What's the Main Application for Cationic Flocculants for Oil & Gas Industry?
What's the Procedure for Preparing Lab Flocculants Solution of Cationic Flocculants?
What are the Characters of Cationic Polyacrylamide?
What's the Flocculation Principle?
Could Cationic Polyacrylamide be Used Alone in Water Treatment?
Why is Polyacrylamide Used as Flocculants?
How to Storage Cationic Polyacrylamide Well?
What is the Difference between Polyacrylamide Emulsion and Powder?
What are the Storage Principles for Handling Emulsions?
How is Sinofloc Service Team?
Shipping
Tips for Using Polyacrylamide in Cold Temperature
Instructions
How to Choose Polyacrylamide, Powder or Emulsion?
Unlike powder polyacrylamide, there is no drying process in the manufacturing process of emulsion polyacrylamide. Therefore, the molecular weight and water solubility of the emulsion polyacrylamide are higher than that of the same kind of powdery polyacrylamide.
Oil - coated water emulsion is usually insoluble in water. The storage temperature of the emulsion is best between 0oCand 30oC, and the storage time of the emulsion is 12 months. The temperature of the emulsion is lower than that of water. The frozen emulsion can be continued after thawing. The greatest advantage of powder is that it is convenient for transportation and storage for a long time, and there is at least two years.
How to Avoid Polyacrylamide Agglomeration?
Polyacrylamide is a high molecular polymer with large molecular weight. When dissolved, it will first expand and then slowly dissolve. If the amount of polyacrylamide added to the water oversized, the surface of polyacrylamide first contacts with the water, then it starts to swell, then the surface area increases which will result to the part that does not touch the water is wrapped up. Some insoluble polyacrylamide groups are formed. It is suggested that in dissolving process, mix the water slowly and evenly, and then add polyacrylamide into the water, which reduces the probability of the cluster.
Advantage of Cationic Polyacrylamide in Sludge Dewatering?
Cationic polyacrylamide has been more and more applied to sludge dewatering in various industries because of its good flocculation and dewatering effect. The ionic degree and dosage of cationic polyacrylamide can affect the effect of the sludge dewatering. The polyacrylamide is a synthetic cationic polymerization flocculants and so mainly related to chain length and the charge of the dewatering performance of polyacrylamide excessive dosage, the positive charge on the ion polyacrylamide adsorption, due to electrostatic repulsion, it will reduce the sludge settling performance, we should pay attention to investment in overtime to calculate in advance the proper dosage. The sludge is negatively charged, and the polymer polyacrylamide product with positive groups is added. The sludge colloid is destabilized by compressing the sludge electric double layer, charge neutralization, adsorption bridging and net sweep and capture, solid-liquid separation and gravity precipitation. After years of time, it has been proved that the cationic polyacrylamide has an unparalleled advantage over other ionic polyacrylamide products in the field of sludge dewatering.
As one of cationic polyacrylamide manufacturers, we provide high quality superabsorbent polymerfor sale, if you have needs, please contact us.
Send product request
Other supplier products
 |
Beijing Sinofloc Chemical Co.,Ltd. | With solid years of growth and expansion, Beijing SinoFloc has become a leading manufacturer and supplier of water-soluble polymers in China. Now w... |
 |
Red Mud Settling Flocculants | SINOFLOCred mud setting flocculants is used for settling aluminum red mud slurries in alumina plants, which provide high settling rates, better sep... |
 |
Superabsorbent for Hygiene Products and Diapers | The using and innovation of superabsorbent polymers revolutionized the diaper and hygiene industry which makes human’s life more comfortable.... |
 |
Enhanced Oil Recovery (EOR) | SINOFLOC manufactures a complete range of anionic polyacrylamide for . Our chemicals for Polymer Flooding, long chain polyacrylamide molecules mixe... |
 |
Drilling Fluid Additives - Drilling Mud Viscosifier | Drilling Fluid Additives - Drilling Mud Viscosifier In the drilling operation, the anionic high polymer is often used as drilling fluid additive... |
Same products
 |
LUBE SH-ONE-4S 400G for Fanuc Machines | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Lubecorp part number 249250 is a 400ml bellows style cartridge often times used in autolube appli... |
 |
Mobil Grease 28 Synthetic Aviation Grease | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Mobil grease 28is a high performance, antiwear grease. Available as a cartridge,2kgcan, 16kg pail... |
 |
Kluber Isoflex Topas NCA 5051 50ml Original Lubricants | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | ISOFLEX TOPAS NCA 5051is a beige synthetic long homogeneous and short fiber. It consists of a syn... |
 |
CHRISTO-LUBE MCG 111 2-OZ Valve Seal Grease | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Christo-Lube®MCG 111is a fully fluorinated grease thickened with PTFE which operates under ex... |
 |
Permatex 81160 85G High Temperature Resistant Resin | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Permatex 81160 High-Temp Red RTV Silicone Gasket, 3 oz |
