Cationic Flocculants

SINOFLOC cationic polyacrylamide powderare co-polymers of acrylamide with increasing proportions of cationic monomers. The cationic groups, which are thus introduced into the polymer, have positive charges in aqueous solution. Our cationic polyacrylamide is available in solid powder and emulsion forms.

Cationic Polyacrylamide (PAM)Specifications

Products	Product Code	Cationic Charge	Molecular Weight
Cationic PAM Powder	SINOFLOC 605	Slightly	High
Cationic PAM Powder	SINOFLOC 606	Slightly	Very High
Cationic PAM Powder	SINOFLOC 610	Low	High
Cationic PAM Powder	SINOFLOC 611	Low	Very High
Cationic PAM Powder	SINOFLOC 615	Low	High
Cationic PAM Powder	SINOFLOC 616	Low	Very High
Cationic PAM Powder	SINOFLOC 620	Low/Medium	High
Cationic PAM Powder	SINOFLOC 621	Low/Medium	Very High
Cationic PAM Powder	SINOFLOC 625	Low/Medium	High
Cationic PAM Powder	SINOFLOC 626	Low/Medium	Very High
Cationic PAM Powder	SINOFLOC 630	Medium	High
Cationic PAM Powder	SINOFLOC 631	Medium	Very High
Cationic PAM Powder	SINOFLOC 635	Medium	High
Cationic PAM Powder	SINOFLOC 636	Medium	Very High
Cationic PAM Powder	SINOFLOC 640	Medium	High
Cationic PAM Powder	SINOFLOC 641	Medium	Very High
Cationic PAM Powder	SINOFLOC 645	Medium	High
Cationic PAM Powder	SINOFLOC 646	Medium	Very High
Cationic PAM Powder	SINOFLOC 650	Medium	High
Cationic PAM Powder	SINOFLOC 651	Medium	Very High
Cationic PAM Powder	SINOFLOC 655	Medium/Strongly	High
Cationic PAM Powder	SINOFLOC 656	Medium/Strongly	Very High
Cationic PAM Powder	SINOFLOC 660	Medium/Strongly	High
Cationic PAM Powder	SINOFLOC 661	Medium/Strongly	Very High
Cationic PAM Powder	SINOFLOC 665	Medium/Strongly	High
Cationic PAM Powder	SINOFLOC 666	Medium/Strongly	Very High
Cationic PAM Powder	SINOFLOC 670	Strongly	High
Cationic PAM Powder	SINOFLOC 671	Strongly	Very High
Cationic PAM Powder	SINOFLOC 680	Very Strongly	High
Cationic PAM Powder	SINOFLOC 681	Very Strongly	Very High
Cationic PAM Powder	SINOFLOC 690	Very Strongly	High
Cationic PAM Emulsion	SINOFLOC 1209	Low	High
Cationic PAM Emulsion	SINOFLOC 1409	Medium	High
Cationic PAM Emulsion	SINOFLOC 1509	Medium/Strongly	High
Cationic PAM Emulsion	SINOFLOC 1809	Very Strongly	High

Products Feeding:

The solutions of SINOFLOC cationic polymers must be prepared in suitable plants equipped with dry powders feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC cationic polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a “maturation” time of 60 minutes for the coagulation of water. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific polyacrylamide applications on cationic polymer, please consult with SINOFLOC team.

FAQ

What is the Cationic Charge Range of Sinofloc Cationic Polyacrylamide?

Sinofloc is supplying cationic polyacrylamide powder flocculants with cationic charge ranging from 0-100%.

What is the Main Characteristics of Sinofloc Cationic Polymer?

What's the Main Application for Cationic Flocculants for Oil & Gas Industry?

What's the Procedure for Preparing Lab Flocculants Solution of Cationic Flocculants?

What are the Characters of Cationic Polyacrylamide?

What's the Flocculation Principle?

Could Cationic Polyacrylamide be Used Alone in Water Treatment?

Why is Polyacrylamide Used as Flocculants?

How to Storage Cationic Polyacrylamide Well?

What is the Difference between Polyacrylamide Emulsion and Powder?

What are the Storage Principles for Handling Emulsions?

How is Sinofloc Service Team?

Shipping

Tips for Using Polyacrylamide in Cold Temperature

Instructions

How to Choose Polyacrylamide, Powder or Emulsion?

Unlike powder polyacrylamide, there is no drying process in the manufacturing process of emulsion polyacrylamide. Therefore, the molecular weight and water solubility of the emulsion polyacrylamide are higher than that of the same kind of powdery polyacrylamide.

Oil - coated water emulsion is usually insoluble in water. The storage temperature of the emulsion is best between 0oCand 30oC, and the storage time of the emulsion is 12 months. The temperature of the emulsion is lower than that of water. The frozen emulsion can be continued after thawing. The greatest advantage of powder is that it is convenient for transportation and storage for a long time, and there is at least two years.

How to Avoid Polyacrylamide Agglomeration?

Polyacrylamide is a high molecular polymer with large molecular weight. When dissolved, it will first expand and then slowly dissolve. If the amount of polyacrylamide added to the water oversized, the surface of polyacrylamide first contacts with the water, then it starts to swell, then the surface area increases which will result to the part that does not touch the water is wrapped up. Some insoluble polyacrylamide groups are formed. It is suggested that in dissolving process, mix the water slowly and evenly, and then add polyacrylamide into the water, which reduces the probability of the cluster.

Advantage of Cationic Polyacrylamide in Sludge Dewatering?

Cationic polyacrylamide has been more and more applied to sludge dewatering in various industries because of its good flocculation and dewatering effect. The ionic degree and dosage of cationic polyacrylamide can affect the effect of the sludge dewatering. The polyacrylamide is a synthetic cationic polymerization flocculants and so mainly related to chain length and the charge of the dewatering performance of polyacrylamide excessive dosage, the positive charge on the ion polyacrylamide adsorption, due to electrostatic repulsion, it will reduce the sludge settling performance, we should pay attention to investment in overtime to calculate in advance the proper dosage. The sludge is negatively charged, and the polymer polyacrylamide product with positive groups is added. The sludge colloid is destabilized by compressing the sludge electric double layer, charge neutralization, adsorption bridging and net sweep and capture, solid-liquid separation and gravity precipitation. After years of time, it has been proved that the cationic polyacrylamide has an unparalleled advantage over other ionic polyacrylamide products in the field of sludge dewatering.

As one of cationic polyacrylamide manufacturers, we provide high quality superabsorbent polymerfor sale, if you have needs, please contact us.

Other supplier products

	Oilfield Chemicals	SINOFLOC supplies our customers a wide range of product portfolio in the oilfield industry. In addition to our standard , we are also supplying cus...
	Polydadmac	SINOFLOCpolyDADMAC is liquid, cationic coagulants with different solid contents and viscosities and suitable a wide range of PH. Our polydadmac coa...
	Anionic Flocculants	SINOFLOC anionic flocculantare co-polymers of acrylamide with increasing proportions of acrylate groups, which give the polymers negative charges, ...
	Nonionic Flocculants	SINOFLOCnonionic flocculantare technically pure polyacrylamides. Nonionic polyacrylamideexhibits neutral nonionic properties in the aqueous solutio...
	Polydadmac	Polydadmac SINOFLOCpolyDADMAC is liquid, cationic coagulants with different solid contents and viscosities and suitable a wide range of PH. Our po...

供应产品

Same products

	MOBILUX EP 0 16KG Lithium Complex Grease	卖方: 广东聚广恒自动化设备有限公司	Mobilux EP 0grease is a brown lithium complex grease that provides good low temperature pumpabili...
	Nisin	卖方: Hebei Shengxue Dacheng Pharmaceutical Co., Ltd.	Nisin, a natural antimicrobial peptide, has various applications in the food industry due to its ...
	Nisin	卖方: Hebei Shengxue Dacheng Pharmaceutical Co., Ltd.	Nisin is considered a natural preservative because it is derived from the fermentation of bacteri...
	Nisin	卖方: Hebei Shengxue Dacheng Pharmaceutical Co., Ltd.	Nisin is a natural antimicrobial peptide produced by certain strains of the bacterium Lactococcus...
	Nisin Quality Manufacturer	卖方: Hebei Shengxue Dacheng Pharmaceutical Co., Ltd.	In some cases, the addition of nisin allows dairy products to be preserved without the need for e...