Roxycide for Aquaculture Disinfection

Roxycide™ an activated oxygen disinfectant that provides solutions for four key challenges for the Aquaculture industry:

Pathogen Control: a highly effective disinfectant against both bacteria and viral pathogens

Biosecurity: an effective tool in the prevention of disease transmission and management

Pond Ecology Management: a mode of action that donates oxygen to the water while helping to manage organic matter

Eco-friendly: active constituents degrade to inert and safe substances allowing ongoing and extended usage in the presence of aqua species.

Video of Roxycide TM for Aquaculture Disinfection

Key Benefits in Aquaculture of Roxycide for Aquarium Disinfectant

The high quality disinfectant has application flexibility to address key production stages including pond preparation, ongoing water management, and disease outbreaks.

Increases oxygen levels in water to help sustain maximum production in ponds and maintain a sustainable pond ecology. Highly effective in the presence of organic matter.

Highly effective in Aquaculture to control and eradicate bacteria, fungi, molds, and all viral families affecting Fish, Shrimp, Crab, and other Aquatics.

The disinfectant for livestock is used to prevent bacterial diseases including gill-rot, white spot disease, ascites, enteritis, putrid skin disease, decayed crusta disease, saprolegniasis.

Spectrum Applications of Roxycide for Fish Tank Disinfectant

Application Strategy of Roxycide for Aquaculture Disinfection

Roxycide™ Usage Instructions of Roxycide for Aquaculture Disinfection

Do not attempt to pour Roxycide™ Powder directly into aqua ponds.

Calculate the volume of water in the pond in cubic meters (m3).

Select the desired application and dosage required from the table above. Calculate dosage depending on the volume of water in the pond.

Always make a base/stock solution by dissolving the required quantity of Roxycide™ powder into fresh, air temperature water at a ratio of 1:100 for best results (example; 1kg Roxycide™ to 100 liters water).

Use a clean container of sufficient size (example 200 liter drums or 1000 liter IBCs)

To make the base/stock solution, mix the required amount of Roxycide™ powder into water, while stirring or agitating to helpfully dissolve Roxycide™ in the base solution water.

Evenly distribute the base solution to the pond, ideally where there is water movement or aeration paddles to aid in dispersal.

Clean and disinfect containers and equipment after.

Storage of stock solution: 5-7days.

Roxycide™ Application and Dosage Directions of Roxycide for Aquaculture Disinfection

Applications	Treatment Periods	Roxycide™ powder/pond (gram/m3)
Disinfection before stocking	1-2 days prior to stocking
Disease prevention in stocked ponds	Once every 10 days.
Disease outbreaks	Once every 3days then repeated every 3 days.
Treatment of fungi buildup	Once a day and repeated for 3 days
Water purification	Once every 3 days
Roxycide™ Application and Dosage rates for Equipment and Bio-Security
Tasks		Dilution	Coverage	Comment
Equipment disinfection Foot dips, Walls, Roofs, floors, Tanks, and other equipment including Hatchery, Nursery, Nets, Tanks, aeration machines, and paddles.		1:100	300ml/m2	Change foot dips every 3 to 4 days
Barrier Control: Boats and Vehicles including feed trucks		1:200	300ml/m2

How to Sanitize a Fish Tank

First, you should clean up the fish tank.

next, put the aquaculture disinfectant in a spray bottle and use an 8:1 water/bleach ratio to make a spray. Spray the fish tank and clean it up.

Then you leave the tank to dry. Once the tank has been left to dry for 24 hours, fill it with water. If the disinfectant contains chlorine, remember to add a de-chlorinator.

Empty the tank and add the de-chlorinator again to make sure it is void of chlorine., and the tank is now ready to use.

Other supplier products

	500ml Hand Wash	Six Core Advantagesof Hand Sanitizer Wash Product usage: Our hand wash soap liquidcan remove all kinds of blood stains, various liquids and oth...
	Hand Sanitizer Gel	Established in 2002, Rosun, a professional antiseptic disinfectant products manufacturerand supplier in China, has been committed to high-end envir...
	Enviroment and Object Surface Cleaning	Established in 2002, Chengdu Rosun China DisinfectantPharmaceutical Co., Ltd. is a leading integrated service provider of sewage treatment and over...
	Disinfectant Powder DW-1	Rosun water disinfectant powderis an advanced oxidation technology basing on sulfate radical [SO4-], using potassium monopersulfate compound powder...
	Disinfectant Powder DW-1	Rosun water disinfectant powderis an advanced oxidation technology basing on sulfate radical [SO4-], using potassium monopersulfate compound powder...

All supplier products

Same products

	Hot Melt Adhesive for Vacuum Insulation Panels	Seller: Foshan Rurga New Material Technology Co. ,Ltd	Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ...
	Hot Melt Adhesive for Packaging	Seller: Foshan Rurga New Material Technology Co. ,Ltd	Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i...
	Hot Melt Adhesive for Hygiene Products	Seller: Foshan Rurga New Material Technology Co. ,Ltd	Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ...
	LSAW Steel Pipe & Tube	Seller: HEBEI TIRICO PIPELINE CO.,LTD	LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ...
	Anti-Corrosion Steel Pipe & Tube	Seller: HEBEI TIRICO PIPELINE CO.,LTD	Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti...