addition base Silicone Rubber for Prototyping 3d lost wax castings Mold Liquid
addition base Silicone Rubber for Prototyping 3d lost wax castings Mold Liquid
Description
Two-component silicone,platinum-curing/ addition-cure type, flowable, vulcanizes at room temperatureor heated temperature.
Can be used for a long time in the temperature range of - 65 ° C - 200 ° C and keep its soft and elastic properties.
Application
- Suitable for molding variety of products in large quantity, such us art crafts, furniture, architectural elements, garden ornaments, shoe, tire, soap, candle, vacuum bagging, wind turbine blades, ship/boat hulls, aircraft hulls, FRP pipes/profiles, beacon lighthouse covers, military industry, aviation and other fields etc.
- Suitable for materials such as resin, PU, PVC, polyester, gypsum/plaster, wax etc.
Features& Advantages
²Food grade, FDA
²Low shrinkage
²Low viscosity
²Anti-deformation
²High temperature resistance
²Not oily
²No bubbles
²Excellent flow levelingwhich will copy finest details and patterns from exquisite products.
²Durable with excellent tear and tensile strength, guarantee molding times
²Easily demolding
²Resist aging, acid,alkali,corrosionand weather aging
Typical propertiesINI-E640
|
PropertiesIndex |
Test Report |
|
|
Before Curing |
Appearance |
Translucentfluid |
|
Viscosity（cps） |
7000±3000 (Adjustable) |
|
|
Operating |
Mixing Ratio （By weight） |
1：1 |
|
Operating Time（25℃/min） |
30～50 (Adjustable) |
|
|
Curing time（hr,basically cured） |
3~5 (Adjustable) |
|
|
Curing time（hr, perfectly cured） |
12 |
|
|
After Curing |
Hardness (shore A) |
40±2 |
|
Tear strength (kN/m) |
16±3 |
|
|
Tensile strength (Mpa) |
8±1 |
|
|
Shrinkage (%) |
≤0.1 |
|
|
Elongation (%) |
320~460 |
|
|
Density (g/cm) |
1.02 |
|
Operation instructions
1.Mix part A and pars B evenly with 1:1 mixing ratio.
Notes: 1) Weigh the two parts exactly by electronic weight. For example, the operation time will be shorten after adding too much catalyst.
2)Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified which will make the finished molds meet a short life and waste silicon rubber.
2.Vacuum pumping
Notes: 1) This step is not have to have, but it is best if there is one. It will discharge all air in the mixture successfully, so as to ensure that therewill be no bubbles in the finished mold.
2) This step is less than 10 minutes. Otherwise, itWill cause cross-linking reaction, and no morefurther steps will be available.
- Pouring casting
Notes: We suggest to set the mold for another 12 hours after demould before put it into large production.
Package
5KG, 20KG, 25KG and 200KG per drum.
(There are metal drum and plastic drum for your choice for 5KG and 20KG)
Shelf life
Twelve(12) months when stored under dry and cool place by original package under 25℃.
WhyChooseus
1.Powerfulfactorywithaproductioncapacityof8000perday, we are the more than 10 years factory in China, with excellent and stable quality.
2.High-endresearchanddevelopment(freesample)
BeingaleadingliquidsiliconemanufacturerinChina,wehaveaprofessionalR&DteamandQCteam(12experts)andourproductisRoHS,MSDS,ISO,REACH,ULapproved,sothereisnoneedtoworryaboutthequality.
3,Efficientservice
Wecanprovidefreetrainingofsiliconetechniqueandfreesiliconesamples.wehaveaprofessionalsalesteamwhowillsolveyourproblemspatiently.Besides,withefficientlogisticsdistributionsystem,youcouldgetyougoodsearlier.Last,goodaftersalesservice,webuildlongtermcooperationrelationship,oncethereisqualityproblem,wecouldsolverightaway.Moreimportantly,returnandexchangeareacceptedwhilequalityproblemsoccurred.
We can provide the free sample, more details about silicone rubber, pls contact Ms Lisa at:
Mobile/ Whatsapp/: +86 188 1670 2967
2967or A108059
E-mail:lisasilicone(at)
Twitter/Facebook:lisasilicone
Send product request
Other supplier products
 |
rtv2 platinum based silicone rubber chocolate candle craft Wax Statue mold | Description rtv2 platinum based silicone rubber chocolate candle craft Wax Statue moldPlatinum cure/addition silicone is a kind of two parts silico... |
 |
softest platinum silicone rubber hepa air filter high quality clear silicon gel | softest platinum silicone rubber hepa air filter high quality clear silicone gel Description Two-component silicone,platinum-curing/ addition-cu... |
 |
Pad printing silicone rubber liquid raw material elastic material electronic | Pad printing silicone rubber liquid raw material elastic material electronic Description Two-component silicone, tin-curing, flowable, vulcanizes... |
 |
RTV potting compound silicone rubber good dielectric properties versatile cure | RTV potting compound silicone rubber good dielectric properties versatile cure Description Two-component silicone,platinum-curing/ addition-cure... |
|
|
addition base Silicone Rubber for Prototyping 3d lost wax castings Mold Liquid | addition base Silicone Rubber for Prototyping 3d lost wax castings Mold Liquid Description Two-component silicone,platinum-curing/ addition-cure ... |
Same products
 |
Heat Sealing Sterilization Pouch | Seller: Hopeway AMD | Heat Sealing Sterilization Pouch is designed for secure medical instrument packaging, supporting ... |
 |
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier | Seller: Trucont LLC | At Trucont LLC, we have ongoing Catalytic converter scrap available for immediate loading and shi... |
 |
Epimedium Extract | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
