Ultra-Pure Helium
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Details
Product Names
Ultra-Pure Helium
Purity
Ultra-Pure Helium: ≥99.9999%
High-Purity Helium: ≥99.999%
Impurity Content (ppm)
| Impurity | Ultra-Pure Helium | High-Purity Helium |
|---|---|---|
| Water (H₂O) | ≤0.5 | ≤3 |
| Oxygen (O₂+Ar) | ≤0.1 | ≤1 |
| Nitrogen (N₂) | ≤0.5 | ≤2 |
| Carbon Monoxide (CO) | ≤0.1 | ≤0.5 |
| Carbon Dioxide (CO₂) | ≤0.1 | ≤0.5 |
| Hydrocarbons (THC) | ≤0.1 | ≤0.5 |
Packaging
Filled in steel cylinders of 40L, 49L, 50L, and also available in smaller cylinders of 8-10L upon customer request.
Applications
Helium is widely used in military, scientific research, petrochemical, refrigeration, medical, semiconductor, pipeline leak detection, superconductivity experiments, metal manufacturing, deep-sea diving, precision welding, and optoelectronic product manufacturing.
Safety Information
CAS Number: 7440-59-7.
Physical and Chemical Properties: Colorless and odorless inert gas. Insoluble in water and ethanol. Melting point (℃): -272.1; Boiling point (℃): -268.9; Relative density (water=1): 0.15 (-271℃); Relative density (air=1): 0.14; Saturation vapor pressure (kPa): 202.64 (-268℃); Flash point (℃): Not applicable; Combustion heat (kJ/mol): Not applicable; Critical temperature (℃): -267.9; Critical pressure (MPa): 2.3; Upper explosion limit (v%): Not applicable; Lower explosion limit (v%): Not applicable; Ignition temperature (℃): Not applicable.
Combustion and Explosion Hazards: Non-flammable. Under high heat, the pressure inside the container may increase, posing a risk of rupture and explosion.
Firefighting Methods: Non-flammable. Remove containers from the fire area if possible. Spray water to keep the containers cool until the fire is out. Evacuate people to the upwind side and isolate the contaminated area. Emergency personnel should wear self-contained positive pressure breathing apparatus and general work clothes. Cut off the leak source if possible. Ensure adequate ventilation to disperse the gas. Handle the leaking container properly, repair and inspect before reuse.
Health Hazards: Inert gas, high concentrations can reduce oxygen partial pressure and pose a risk of asphyxiation. Symptoms include increased breathing rate, lack of concentration, ataxia, followed by fatigue, restlessness, nausea, vomiting, coma, convulsions, and potentially death.
First Aid Measures: Inhalation: Quickly move to a fresh air area. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing stops, perform artificial respiration immediately. If breathing and heartbeat stop, perform artificial respiration and external chest compressions immediately.
Send product request
Other supplier products
 |
Epoxy Anti-Corrosion Powder Coating for Pipeline Internal Coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Product Introduction: This product is formulated using special epox... |
 |
Flat matte MT-629/62179 | Introduction No. MT-629/62179 Color Brown Surface Flat matte System Super weather-resistant polyester Scope of a... |
 |
3-Chloro-5-Fluoro-2-Hydroxybenzaldehyde CAS No.82128-69-6 | WA：+86 132 6275 2056WEB: std-coatings.com Names and Identifiers Name 3-Chloro-5-Fluoro-2-Hydroxybenzaldehyde Synonyms 82128-64-63-CH... |
 |
Weather-Resistant Powder Coatings | WA：+86 132 6275 2056 WEB: std-coatings.com Product Overview Weather-Resistant Powder Coatingsare high-performance coatings designed to provide... |
 |
Indoor powder coatings | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Indoor powder coatings are environmentally friendly and highly efficie... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
