Colorless transparent liquid STD-8833
Basic Information
Colorless Transparent Liquid 8833 is a high - performance material widely used in various industrial applications due to its unique properties.
Chemical Properties
| Property | Value |
|---|---|
| Appearance | Clear to pale yellow liquid |
| Flash Point | <21℃ (68.9℉) |
| Viscosity | 50-200 mPa·s @20℃ (68℉) |
| Specific Gravity | 0.995-1.005 g/cm³ |
| Resin Content | 100% |
Application Matrix
| Application | Description |
|---|---|
| Coatings | Used for protective and decorative coatings |
| Adhesives | Provides strong bonding for various materials |
| Pre - ceramic polymers | Acts as a precursor for ceramic materials |
| Polymer Matrix Composites (PMC) | Enhances the properties of composite materials |
| Non - flammable composites | Offers flame - retardant properties |
| Organic/Inorganic hybrids | Combines the benefits of both organic and inorganic materials |
| Casting elastomers | Used for casting flexible and elastic parts |
| Rigid castings | Suitable for creating rigid and durable components |
Curing Performance Pre - Curing Properties
| Property | Value |
|---|---|
| Appearance | Colorless transparent liquid |
| Post - Cure Density | 1.6 - 2.0 g/cm³ |
| Viscosity @20℃ | 50 - 200 cPs |
| Film Thickness | 0.5 - 20 μm |
Curing Methods
| Method | Time |
|---|---|
| 23℃/50% RH | 1 - 3 days |
| 100℃ | 2 hours |
| 200 - 300℃ | 10 - 30 minutes |
Curing Behavior
Performance depends on ambient temperature/humidity.
| Film Thickness (μm) | Application | Tack - Free (min) | Hardness (ASTM D3363) | Adhesion (ASTM D3359) |
|---|---|---|---|---|
| 7 - 15 | Troweling | 25 - 30 | 6H | 5B |
| 25 - 35 | Brushing | 25 - 30 | 7H | 5B |
| 24 - 37 | Spraying | 25 - 30 | 7H | 5B |
Post - Curing Properties (30℃/55% RH on Q - panel steel)
| Property | Result |
|---|---|
| Tinplate Adhesion | 5B |
| Wafer Adhesion | 5B |
| Stainless Steel Adhesion | 5B |
| Aluminum Alloy Adhesion | 5B |
| Glass Adhesion | 5B |
| Ceramic Adhesion | 5B |
| Pencil Hardness | 5 - 7H |
| High - Temp Resistance | 800℃ |
| Salt Spray Resistance | 2.400hrs passed |
| QUV Aging | 3.000hrs passed |
Mechanical Properties
| Property | Value |
|---|---|
| Tensile Strength | 20 - 30 MPa |
| Elongation at Break | 10 - 20% |
| Flexural Modulus | 1.500 - 2.000 MPa |
| Impact Resistance | 2 - 3 kJ/m² |
Environmental Resistance
| Property | Value |
|---|---|
| UV Resistance | 3.000 hours exposure without significant degradation |
| Chemical Resistance | Resistant to common solvents and acids |
| Water Resistance | Immersion in water for 1.000 hours without significant change |
Send product request
Other supplier products
 |
Minimum Ignition Temperature (MIT) – Dust Cloud Tester/ Dust Explosion Safety Tester/ Combustible Dust Ignition Temperature Tester | Description： Dust Cloud Minimum Ignition Temperature Tester is mainly used to assess the explosiveness of dust in the production and processing pl... |
 |
Rubber low temperature brittleness testing machine | Product Introduction: Plastic low temperature embrittlement testing machine is to determine the temperature of rubber and plastic when the sample ... |
 |
Micro Controll Constant-Speed Friction Plate Tester | Main uses 1. microcomputer control fixed-speed friction tester is mainly used to measure the friction coefficient and wear rate of automobile brak... |
 |
Gelbo Flex flexing chamber | Gelbo Flex flexing chamber is designed to measure the amount of fiber debris of non-woven fabrics in the dry state in accordance with ISO9073-10. I... |
 |
Fat End Type of Thread EndSuction Machine | lt is applicable to clean up large-sizegarment, such as: surgical gown, robeetc.,thread end and fibre dust cutdown from carpet and rugs (no statice... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
