Water-dispersible isocyanate curing agent STD 268
Product Description
STD268 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesive. After addition of STD268, the ready-to-use mixture must be used within the pot life.
STD268 can be diluted with the solvents, such as propylene glycol methyl ether acetate (PMA), propylene glycol diacetate (PGDA), butyl acetate, etc. Only PU grade solvents (< 0.05% water) should be used and the solvents must be tested in advance by the user to determine suitability.
Properties
1.High gloss and high building up.
2.Excellent weather resistance.
Characteristic Data
(Typical values – not specifications)
|
Property |
Value |
Unit |
Test Method |
|
Appearance |
Colorless to yellowish transparent liquid |
— |
Visual |
|
NCO content |
20.5 ± 0.5 |
% |
GB/T 12009.4-2016 |
|
Viscosity |
5000 – 7000 |
mPa·s |
Brookfield LV, 63#/3 rpm,25 °C |
|
Color (APHA) |
< 80 |
— |
GB/T 1722-1992 |
|
Monomeric isocyanate |
≤ 0.1 |
% |
GB/T 18446-2009 |
|
Flash point |
~196 |
°C |
GB/T 5208 |
|
Density |
~1.17 |
g/cm³ |
GB/T 4472-2011 |
Storage & Handling
The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight. The validity of this product is for 12 months, performance assessment is recommended before use after shelf life. The product should be protected from freezing during storage. Water dispersible polyisocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The generation of carbon dioxide can lead to dangerous increases in pressure. The containers must always be kept tightly closed and the access of water in all forms must be prevented. It is suggested to use up once the package is open.
Send product request
Other supplier products
 |
Fluidized Bed Dip Coating Polytetrafluoroethylene (PTFE) Powder Coating | Premium PTFE Powder Coating Solutions China-Based Manufacturing | Global Industrial Support We manufacture and export a comprehensive range of Po... |
 |
Dicyandiamide Cured Epoxy Powder Coating | Powder coatings are formulated with different resin bases to meet diverse performance, aesthetic, and environmental demands. Selecting the right re... |
 |
Sand Texture Matt MT-049/13705 | Introduction No. MT-049/13705 Color Traffic White Surface Sand Texture Matt System Polyester/049 Scope of applicatio... |
 |
Reverse Osmosis Membrane Flocculant STD-403 | Performance and use Reverse osmosis flocculant STD-403 is a high-efficiency liquid flocculant, mainly used in reverse osmosis pretreatment system;... |
 |
Powder Coating for Electrostatic Spray Application on Cold Surfaces | Product Description MT R4-ES HJ601R is a high quality thermosetting epoxy powder coating for the corrosion protection of valves and fittings, manu... |
Same products
 |
5.4,4'-Oxydiphenol CAS 1965-09-9 | Seller: Yufeng International Group Co., Ltd | Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-... |
 |
1,1,2,2-Tetrachloroethane CAS 79-34-5 | Seller: Yufeng International Group Co., Ltd | Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te... |
 |
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9 | Seller: Yufeng International Group Co., Ltd | Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,... |
 |
2.1,1,2-Trichloroethane CAS 79-00-5 | Seller: Yufeng International Group Co., Ltd | Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-... |
 |
1.1,1,2,2-Tetrachloroethane CAS 79-34-5 | Seller: Yufeng International Group Co., Ltd | Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te... |
