.

Reverse Osmosis Membrane Flocculant STD-403

Performance and use

Reverse osmosis flocculant STD-403 is a high-efficiency liquid flocculant, mainly used in reverse osmosis pretreatment system; added to the front end of the multi-media filter, it has a significant effect on reducing the SDI value of reverse osmosis influent, especially for surface water with high organic matter content.
It is suitable for a wide range of pH values in water, has a fast coagulation speed, has a large and solid coagulation density, and has good sedimentation properties.
STD membrane flocculant can increase the solid-liquid separation speed and extend the filter working cycle during direct filtration.
Miscible with water in any proportion.

Technical indicators

Item Indicators
Appearance Colorless to light yellow liquid
PH(1%) 3.0-5.0
Specific gravity (20℃ g/cm3) ≥1.10

How to use

STD-403 must be added at the front end of the multi-media filter to achieve flocculation and sedimentation.
The product works better in water with high pH value; the product has no special requirements for dosing system and materials.

Dosage Instructions

Usually the dilution ratio is required to be less than 10 times, or the reverse osmosis flocculant is added in the original solution. This depends on the configuration of the dosing system. Before dosing, please consult with STD technicians.
The technicians recommend the appropriate dosage according to the water quality and process characteristics, and obtain better results through on-site debugging. The general dosage is 3-9ppm.
The addition point of the agent should be selected far away from the filter inlet (5.0-7.0 meters), and the injection point should be selected in the center of the water flow pipe, so as to ensure uniform mixing of the agent when the water is turbulent.

Packaging and storage

Packaged in plastic barrels, 25kg or 20kg/barrel.

The physical and chemical properties of STD membrane flocculant are stable. It can be stored in a cool place with a storage period of 1 year.

Safety and protection

STD-403 is weakly acidic. Pay attention to labor protection during operation to avoid contact between the flocculant and skin, eyes, etc. Rinse with plenty of water after contact.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Sports equipment powder coating
Sports equipment powder coating Surface Finish Options Overview Characteristics of powder coatings ''It does not contain toxic, solvent free, or volatile toxic substances, so ...
High Reflectivity (Infrared Camouflage Cooling) Powder Series/metal powder coating factory
High Reflectivity (Infrared Camouflage Cooling) Powder Series/metal powder coating factory Introduction Powder coatings that reflect infrared radiation reduce the surface temperature of building facades by up to 20 percent. This “s...
DMDTA Dimethyl Dodecyl Tetradecyl Amine
DMDTA Dimethyl Dodecyl Tetradecyl Amine Product details PropertySpecification Chemical Name Dimethyl Dodecyl Tetradecyl Amine Code WEDOMINE DMDTA CAS No. 84649-84...
Brake pad powder
Brake pad powder Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according t...
Low Temperature Powder Coating Series
Low Temperature Powder Coating Series Introduction Key Features & Specifications FeatureSpecification / Benefit Low Temperature Curing 120°C × 20–30 ...
All supplier products

Same products

Hot Melt Adhesive for Vacuum Insulation Panels
Hot Melt Adhesive for Vacuum Insulation Panels Seller: Foshan Rurga New Material Technology Co. ,Ltd Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ...
Hot Melt Adhesive for Packaging
Hot Melt Adhesive for Packaging Seller: Foshan Rurga New Material Technology Co. ,Ltd Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i...
Hot Melt Adhesive for Hygiene Products
Hot Melt Adhesive for Hygiene Products Seller: Foshan Rurga New Material Technology Co. ,Ltd Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ...
LSAW Steel Pipe & Tube
LSAW Steel Pipe & Tube Seller: HEBEI TIRICO PIPELINE CO.,LTD LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ...
Anti-Corrosion Steel Pipe & Tube
Anti-Corrosion Steel Pipe & Tube Seller: HEBEI TIRICO PIPELINE CO.,LTD Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti...