Epoxy Powder Coating
Introduction
The main components are epoxy resin and curing agent.
Brief description
It is mainly composed of epoxy resin and curing agent.
Features
- Excellent mechanical properties (impact resistance, hardness, toughness, adhesion, etc.)
- Good coating surface effect.
- Strong corrosion resistance.
- Good insulation.
Application areas
Mechanical and electrical equipment, safes, industrial equipment, pipelines, steel wires, chemical laboratory equipment and other anti-corrosion fields.
Product series
Standard curing type and low temperature curing type are available.
Can be made into various glosses and colors.
Can be made into hot melt epoxy.
Technical parameters
Powder performance
Specific gravity: 1.1~1.8g/cm³
Mechanical properties
| Test items | Test standards | Performance indicators |
|---|---|---|
| Pencil hardness | GB/T6739-1996 | >2H |
| Adhesion | GB/T9286-1998 | Grade 0 |
| Bending | GB6742-86 | Φ3mm |
| Impact | GB/T1732-93 | 50kg.cm |
| Cupping | GB9753-88 | >6mm |
Corrosion resistance
| Test items | Test standards | Performance indicators |
|---|---|---|
| Salt spray resistance | GB/T1771-91 | No change in coating after 1000 hours, unilateral corrosion at scratches <2mm |
| Moisture and heat resistance | GB/T1740-79 | Slight gloss loss after 1000 hours, ≤1 level |
Note: The above parameters are laboratory data and are for reference only. The actual indicators are related to factors such as customer environment, equipment, materials, pretreatment, and spraying process.
Application conditions
Pretreatment: phosphating, chromating, sandblasting
Coating: Suitable for corona electrostatic spraying, friction electrostatic spraying, electrostatic fluidized bed spraying, fluidized bed dipping
Curing conditions:
200℃ at 10 minutes.
180℃ at 15 minutes.
Can also be designed according to customer needs.
Drinking water product certification
British WRA5 standard..
US NSF61 standard.
German KTW/W270 standard.
Drinking water valve testing standards: BS/EN14901. ANSI/NSF61.
Packaging
Carton packaging, net weight 20kg/box.
Lined with double-layer polyethylene plastic bags.
Storage conditions
Store in a dry and ventilated room below 30℃.
Avoid direct sunlight.
Under this condition, the powder can be stably stored for 6 months.
Safety and health
- All raw materials of powder coatings do not contain toxic substances.
- No toxic gas is released during baking.
- Avoid inhalation of dust during use.
- Operators should wear dust masks.
- Minimize long-term contact between skin and powder.
- Paint attached to the skin can be washed with soap.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Super weather-resistant polyester powder coating | Brief description This series of products is based on saturated carboxyl polyester resin and TGIC curing agent as the main base material. It is a ... |
 |
Frame & chassis powder coatings MT-A400 series | Product Overview: Weather-resistant pure polyester powder coatings designed for frame and chassis parts Coating characteristics: – High ... |
 |
Light blue high gloss powder coating | Introduction High gloss powder coating is a kind of excellent performance coating, with the following characteristics: – Appearance perform... |
 |
7-Chloro-1-cyclopropyl-6-fluoro-4-oxo-1,4-dihydroquinoline-3-carboxylic acid | CAS Number: 86393-33-1. Molecular Formula: C13H9ClFNO3. Molecular Weight: 281.67 g/mol. Appearance: Grayish-white crystalline powder. Melting P... |
 |
Ultra-Pure Helium | Product Details Product Names Ultra-Pure Helium Purity Ultra-Pure Helium: ≥99.9999% High-Purity Helium: ≥99.999% Impurity Content (ppm)... |
